MOBILGEAR 630

Remove from further exposure. Use adequate respiratory protection. If respiratory irritation, dizziness, nausea, or unconsciousness occurs, seek immediate medical assistance. If breathing has stopped, assist ventilation with a mechanical device or use mouth-to-mouth resuscitation.

Symptoms: respiratory irritation, dizziness, nausea, or unconsciousness

Wash contact areas with soap and water. If product is injected into or under the skin, or into any part of the body, regardless of the appearance of the wound or its size, the individual should be evaluated immediately by a physician as a surgical emergency.

Symptoms: initial symptoms from high pressure injection may be minimal or absent

Flush thoroughly with water. If irritation occurs, get medical assistance.

Symptoms: irritation

First aid is normally not required. Seek medical attention if discomfort occurs.

Symptoms: discomfort

Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.

Straight Streams of Water

Smoke, Fume, Aldehydes, Sulfur oxides, Incomplete combustion products, Oxides of carbon

Evacuate area. Prevent runoff from fire control or dilution from entering streams, sewers, or drinking water supply. Use water spray to cool fire exposed surfaces and to protect personnel.

In the event of a spill or accidental release, notify relevant authorities in accordance with all applicable regulations.

Dike far ahead of liquid spill for later recovery and disposal.

Prevent entry into waterways, sewers, basements or confined areas.

Recover by pumping or with suitable absorbent. Remove from the surface by skimming or with suitable absorbents.

Materials: suitable absorbent, booms

Prevent small spills and leakage to avoid slip hazard. Static Accumulator: This material is a static accumulator.

Do not store in open or unlabelled containers.

No special requirements under ordinary conditions of use and with adequate ventilation.

No protection is ordinarily required under normal conditions of use.

If contact is likely, safety glasses with side shields are recommended.

No special requirements under ordinary conditions of use and with adequate ventilation. For high airborne concentrations, use an approved supplied-air respirator, operated in positive pressure mode. Supplied air respirators with an escape bottle may be appropriate when oxygen levels are inadequate, gas/vapor warning properties are poor, or if air purifying filter capacity/rating may be exceeded.

No skin protection is ordinarily required under normal conditions of use. In accordance with good industrial hygiene practices, precautions should be taken to avoid skin contact.

See Sections 6, 7, 12, 13.

Material is stable under normal conditions.

Will not occur.

Excessive heat. High energy sources of ignition.

Strong oxidizers

Material does not decompose at ambient temperatures.

burning in an enclosed controlled burner for fuel value or disposal by supervised incineration at very high temperatures

Product is suitable for burning in an enclosed controlled burner for fuel value or disposal by supervised incineration at very high temperatures to prevent formation of undesirable combustion products.