Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SAFE STEP 100 - ALL COLOURS
- Product Form
- Mixture
- Product Code
- 43266; 43267
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 2420-H0XD-N00Q-XWJT
Identified Uses
Professional use, Industrial use
Uses advised against
No additional information available
Manufacturers & Suppliers
ROCOL a division of ITW Ltd
manufacturer
Rocol House, Wakefield Rd, Swillington, LS26 8BS Leeds - United Kingdom
+44 (0)113 232 2600
http://www.rocol.com
Emergency Contacts
Emergency Contact
+44 (0)113 232 2600
National Poisons Information Service (Birmingham Centre) City Hospital
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Xylene EC: 215-535-7 | 1330-20-7 | 15 - 30% | Yes |
| ETHYLBENZENE EC: 202-849-4 | 100-41-4 | 2.4 - 5% | Yes |
| OCTADECANOIC ACID, 12-HYDROXY-, REACTED WITH ETHYLENDIAMINE EC: 309-629-8 | 100545-48-0 | 1% | Yes |
Note C : Some organic substances may be marketed either in a specific isomeric form or as a mixture of several isomers. In this case the supplier must state on the label whether the substance is a specific isomer or a mixture of isomers.
Notes
Note C : Some organic substances may be marketed either in a specific isomeric form or as a mixture of several isomers. In this case the supplier must state on the label whether the substance is a specific isomer or a mixture of isomers.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
Symptoms: May cause drowsiness or dizziness.
Take off immediately all contaminated clothing. Rinse skin with water/shower.
Symptoms: May cause an allergic skin reaction.
Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.
Symptoms: May cause eye irritation.
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
Flammable liquid and vapour. May form flammable/explosive vapour-air mixture.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel.
Avoid release to the environment.
Collect spillage. Take up liquid spill into absorbent material, e.g.: sand.
Materials: sand
Related Products
Similar products with comparable safety profiles
SAFE STEP 100 - ALL COLOURS
---
125/G139 - SUREGRIP (ALL COLOURS)
UFI: TD8P-V2N3-0004-CD6U
EASYLINE EDGE - ALL COLOURS - FROM 1/06/2015
---
EASYLINE EDGE - ALL COLOURS - FROM 1/06/2015
---
SAFE STEP METAL PRIMER - BASE
---
534/G150 - DECK PAINT (All colours)
---
CGS 8508 all colors
UFI: T250-T04N-N00U-P6X4
CGS 8525 all colors
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. No open flames. No smoking. Take precautionary measures against static discharge. Use only non-sparking tools. Avoid breathing vapours. Use only outdoors or in a well-ventilated area. Handle empty containers with care because residual vapours are flammable.
Keep container tightly closed. Keep away from sources of ignition - No smoking.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
No open flames. No smoking. Take precautionary measures against static discharge. Use only non-sparking tools.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No additional information available
Wear gloves according to EN374 resistant to the solvent(s) in use. XYLENES. Type: Reusable gloves, Material: Polyvinylchloride (PVC), Permeation: 2 (>30 minutes), Standard: EN 374-2
Chemical goggles or safety glasses. Type: Safety glasses, Field of application: Droplet, Characteristics: With side shields, Standard: EN 166
Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. Device: Air-Purifying Respirator (APR), reusable, Filter type: Type A - High-boiling (>65 °C) organic compounds, Condition: Vapour protection, Standard: EN 14387
No additional information available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Flammable liquid and vapour. May form flammable/explosive vapour-air mixture.
No additional information available
Not established.
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks.
Strong acids. Strong bases.
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT
- Transport Class
- 3
- Packing Group
- III
Packing instructions (ADR) : P001, IBC03, LP01, R001; Special packing provisions (ADR) : PP1; Mixed packing provisions (ADR) : MP19; Portable tank and bulk container instructions (ADR) : T2; Portable tank and bulk container special provisions (ADR) : TP1, TP29; Tank code (ADR) : LGBF; Vehicle for tank carriage : FL; Special provisions for carriage - Packages (ADR) : V12; Special provisions for carriage - Operation (ADR) : S2
163, 223, 367, 955
PCA Excepted quantities (IATA) : E1; PCA Limited quantities (IATA) : Y344; PCA packing instructions (IATA) : 355; CAO packing instructions (IATA) : 366
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SAFE STEP 100 - ALL COLOURS?
The signal word is warning.
What is the physical form of SAFE STEP 100 - ALL COLOURS?
SAFE STEP 100 - ALL COLOURS is a liquid appearing as liquid. with grey. yellow. color. It has characteristic odour. xylenes. odor.
What is the solubility of SAFE STEP 100 - ALL COLOURS?
No data available
What is SAFE STEP 100 - ALL COLOURS used for?
Professional use, Industrial use
What are the hazard statements for SAFE STEP 100 - ALL COLOURS?
This substance has 2 hazard statements:
- H226: Flammable liquid and vapour.
- H315: Causes skin irritation.
What is the melting point of SAFE STEP 100 - ALL COLOURS?
The melting point is No data available. and the boiling point is No data available.