Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DAMICOAT 2407-02 RED
- Product Code
- 352929
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Von Roll Italia S.r.l.
manufacturer
Via Rigolfo, 73, 10028 TROFARELLO (TO), ITALY
Emergency Contacts
Von Roll Italia S.r.l.
+390116493111
h. 8/12 + 13/17 italian time
National Poisons Information Service (Birmingham Unit)
844 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-n-butyl-benzo[d]isothiazol-3-one EC: 420-590-7 | 4299-07-4 | 0.1% | Yes |
| xylene EC: 215-535-7 | 1330-20-7 | 25 - 40% | Yes |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 3.5 - 7.5% | Yes |
| Idrocarburi, C9, aromatici EC: 918-668-5 | --- | 2.5 - 4.75% | Yes |
| REACTION MIXTURE OF ETHYLBENZENE AND XYLENES EC: 905-588-0 | --- | 4.5% | Yes |
| butan-1-ol EC: 200-751-6 | 71-36-3 | 2 - 2.1% | Yes |
| Naphtha (petroleum), hydrotreated heavy EC: 919-857-5 | 64742-48-9 | 0.7 - 1.2% | Yes |
| n-butyl acetate EC: 204-658-1 | 123-86-4 | 1.1% | Yes |
| Acido neodecanoico, sale di cobalto EC: 248-373-0 | 27253-31-2 | 0.4 - 0.5% | Yes |
| 2-ethylhexanoic acid, zirconium salt | 22464-99-9 | 0.1 - 0.4% | Yes |
| cobalt(II) 2-ethylhexanoate EC: 205-250-6 | 136-52-7 | 0.1 - 0.25% | Yes |
| toluene EC: 203-625-9 | 108-88-3 | 0.3% | Yes |
| Diidrossido di cobalto EC: 244-166-4 | 21041-93-0 | 0.1 - 0.2% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If symptoms persist consult doctor.
Immediate Medical Attention
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Water with full jet
During heating or in case of fire poisonous gases are produced.
Firefighter Protection
Mouth respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course. Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols. Keep ignition sources away - Do not smoke. Protect against electrostatic charges. Keep respiratory protective device available.
CONSERVARE IN AMBIENTE FRESCO MAX 30°C - STORE IN A COOL PLACE (MAX 30°)
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
This disposal considerations refer to intact product without external contaminations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1866
- Shipping Name
- RESIN SOLUTION
- Transport Class
- 3
- Packing Group
- III
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DAMICOAT 2407-02 RED?
The signal word is danger.
What is the physical form of DAMICOAT 2407-02 RED?
DAMICOAT 2407-02 RED is a fluid appearing as form: fluid, colour: according to product specification with according to product specification color. It has characteristic odor.
What are the hazard statements for DAMICOAT 2407-02 RED?
This substance has 7 hazard statements:
- H226: Flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H373: May cause damage to the hearing organs through prolonged or repeated exposure.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of DAMICOAT 2407-02 RED?
The melting point is Undetermined. and the boiling point is Undetermined..