NextSDS Logo
MO

MOTIP PRIMER (Black / Grey / Red / White)

DANGER Aerosol SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
MOTIP PRIMER (Black / Grey / Red / White)
Product Code
04052 / 04054 / 04055 / 04056 (500 ml) 00101 / 00103 / 00102 (150 ml)

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Paint

Overview

MOTIP PRIMER (Black / Grey / Red / White) is a aerosol, according to product specification substance commonly used paint.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Aerosol Category 1 H222
Eye Irrit. Category 2 H319
STOT SE Category 3 H336
Aquatic Chronic Category 3 H412

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.
  • H412: Harmful to aquatic life with long lasting effects.

Precautionary Statements

  • P102: Keep out of reach of children.
  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P211: Do not spray on an open flame or other ignition source.
  • P251: Do not pierce or burn, even after use.
  • P260: Do not breathe spray.
  • P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 C/122 F.
  • P501: Dispose of contents/container in accordance with local regulations.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

MOTIP DUPLI B.V.

manufacturer

๐Ÿ“

Wolfraamweg 2 NL- 8471 XC Wolvega The Netherlands

๐ŸŒ

NL

๐Ÿ“ 

+31 (0)561 694411

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

๐Ÿ“ž

+31 (0)561-694400

๐ŸŒ

NL

๐Ÿ•’

09:00h - 17:00h

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

General Composition

Mixture of substances listed below with nonhazardous additions.

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Acetone a.r.
EC: 200-662-2
67-64-1 25-50% โš ๏ธ Hazardous
N-Butylacetaat
EC: 204-658-1
123-86-4 12.5-20% โš ๏ธ Hazardous
propaan vloeibar gemaakt
EC: 200-827-9
74-98-6 10-12.5% โš ๏ธ Hazardous
2-methoxy-1methylethylacetaat
EC: 203-603-9
108-65-6 5-10% โš ๏ธ Hazardous
n-Butane, pure
EC: 203-448-7
106-97-8 5-10% โš ๏ธ Hazardous
Isobutane (R600a)
EC: 200-857-2
75-28-5 5-10% โš ๏ธ Hazardous
butanol
EC: 200-751-6
71-36-3 2.5-5% โš ๏ธ Hazardous
Collodium 9004-70-0 2.5-5% โš ๏ธ Hazardous
2 propanol
EC: 200-661-7
67-63-0 1-2.5% โš ๏ธ Hazardous
Zinkfosfaat
EC: 231-944-3
7779-90-0 0.1-1% โš ๏ธ Hazardous

Additional Information

For the wording of the listed risk phrases refer to section 16.

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Supply fresh air; consult doctor in case of complaints.

๐Ÿ‘๏ธ Eye Contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

๐Ÿฝ๏ธ Ingestion/Swallowing

Drink plenty of water and provide fresh air. Call for a doctor immediately.

๐Ÿšจ Immediate Medical Attention Required

No further relevant information available.

Medical Treatment

No further relevant information available.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿ’ง Solubility
Not miscible or difficult to mix.
๐Ÿ“Š Form
Aerosol
๐Ÿ“Š Partition Coefficient
Not determined.
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Lower Explosive Limit
1.2 Vol %
โš–๏ธ Density
0.767 g/cm (6.401 lbs/gal)
Critical Property
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Dynamic Viscosity
Not determined.
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Odor Threshold
Not determined.
๐Ÿ“Š Relative Density
Not determined.
๐Ÿ“Š Kinematic Viscosity
Not determined.
๐Ÿ‘๏ธ Appearance
Aerosol, According to product specification
๐Ÿ‘ƒ Odor
Characteristic
๐Ÿ“Š Auto Ignition Temperature
333 C (631 F)
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Decomposition Temperature
Not determined.
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ”ฅ Flash Point
< 0 C (< 32 F)
Critical Property
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ“Š Voc Content
686.4 g/l
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Solubility In Water
Not miscible or difficult to mix.
๐ŸŽจ Colour
According to product specification
๐Ÿ’จ Vapor Pressure
3500 hPa (2625 mm Hg)
๐Ÿ’จ Boiling Point
Not applicable, as aerosol.
Critical Property
๐Ÿ“Š Bulk Density
Not available
๐Ÿงช Physical State
Aerosol
Critical Property
๐Ÿ“Š Properties Status
Not available
๐Ÿ“Š Molecular Weight
Not available
๐Ÿ“Š Freezing Point
Not available
๐Ÿ”ฅ Flammability
Not applicable.
๐Ÿ“Š Upper Explosive Limit
13.0 Vol %
๐Ÿ“Š State Under Standard Conditions
Not available
๐ŸงŠ Melting Point
Undetermined.
Critical Property
๐Ÿ“Š Physical State Data
aerosol
๐Ÿ“Š Vapor Density
Not determined.
๐Ÿงช Ph
Not determined.
๐Ÿ’จ Evaporation Rate
Not applicable.

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿ‘๏ธ Eye Protection

Tightly sealed goggles

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿท๏ธ UN Number

UN1950

๐Ÿ“ฆ Proper Shipping Name

AEROSOLS

โš ๏ธ Transport Hazard Class

2.1

๐Ÿ“‹ Packing Group

Void

๐Ÿš› ADR Transport Precautions

Warning: Gases.

๐Ÿšข IMDG Maritime Transport Precautions

Warning: Gases.

โœˆ๏ธ IATA Air Transport Precautions

Warning: Gases.

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for MOTIP PRIMER (Black / Grey / Red / White)?

The signal word for this substance is "danger".

What is the physical form of MOTIP PRIMER (Black / Grey / Red / White)?

MOTIP PRIMER (Black / Grey / Red / White) is a aerosol appearing as aerosol, according to product specification with according to product specification color. It has characteristic odor.

What is the solubility of MOTIP PRIMER (Black / Grey / Red / White)?

Not miscible or difficult to mix.

What is MOTIP PRIMER (Black / Grey / Red / White) used for?

Paint

What are the hazard statements for MOTIP PRIMER (Black / Grey / Red / White)?

This substance has 5 hazard statements: H222: Extremely flammable aerosol. H229: Pressurised container: May burst if heated. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness. H412: Harmful to aquatic life with long lasting effects.

What is the melting point of MOTIP PRIMER (Black / Grey / Red / White)?

The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..