NextSDS Logo
Safety Data Sheet EN

PETRONAS GEAR MEP 460

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
PETRONAS GEAR MEP 460
Product Code
77621

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Gear fluid

Uses advised against

This product should not be used for other purposes than those specified without the advice of an expert.

Manufacturers & Suppliers

P

PETRONAS Lubricants International Sdn. Bhd. (485509-D)

manufacturer

Tower 1, PETRONAS Twin Towers, Kuala Lumpur City Centre, 50088 Kuala Lumpur - MALAYSIA

+603 23014245 / 4253 / 4252

Emergency Contacts

Emergency Answer Service

+60 3 6207 4347

24h/7d

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Aquatic Chronic Cat. 3

GHS Pictograms

Hazard Statements

H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P273 Avoid release to the environment.
P501 Dispose of contents/container in accordance with local, regional, national, international regulation

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Severely refined mineral and/or synthetic oils, additives.

Chemical Name CAS Number Concentration Hazardous
Reaction products of 4-methyl-2-pentanol and diphosphorus pentasulfide, propoxylated, esterified with diphosphorus pentaoxide, and salted by amines, C12-14- tert-alkyl EC: 931-384-6 --- 0.1 - 0.25% Yes
(Z)-octadec-9-enylamine EC: 204-015-5 112-90-3 0.05 - 0.1% Yes
Not classified oils --- 90 - 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Expose affected person to fresh air and obtain medical attention if necessary.

Skin contact

Remove contaminated clothes and shoes and rinse thoroughly with plenty of water and soap.

Eye contact

Rinse thoroughly with plenty of water for at least 10 minutes keeping eyelids open. Remove contact lenses if this can be done easily. Obtain medical attention in case of development and persistence of pain and redness. In case of contact with hot product, rinse thoroughly with plenty of water to dissipate heat. Obtain immediate medical attention to assess eye conditions and the correct treatment to be practiced.

Symptoms: pain and redness

Ingestion

Do not induce vomiting to avoid aspiration into the respiratory tracts. Wash out thoroughly the mouth with water. Obtain immediate medical attention.

Immediate Medical Attention

Obtain immediate medical attention for ingestion. Obtain immediate medical attention to assess eye conditions and the correct treatment to be practiced in case of contact with hot product.

Medical Treatment

Refer to section 4.1.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use foam, carbon dioxide, dry chemical powder, water mist, water, and carbon dioxide (CO2).

Unsuitable media

Avoid high pressure water jet. None in particular.

Specific hazards

Don't breathe combustion fumes: fire can form harmful compounds. Do not inhale explosion and combustion gases. Burning produces heavy smoke.

Instructions

Cool down with water the containers don't get involved in fire to avoid their possible explosion. Move undamaged containers from immediate hazard area if it can be done safely.

Firefighter Protection

Use suitable breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid ingestion of product. Avoid contact with skin and eyes by wearing appropriate protective clothing. Avoid to breathe fumes and aerosols. Surfaces on which the product has been spilled may become slippery. Wear personal protection equipment.

Small spill

Contain small spills with absorbent material.

Large spill

In case of large spills dike, absorb and shovel up into suitable containers for disposal.

Environmental

Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.

Cleanup methods

shovel up into suitable containers for disposal

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid ingestion. Avoid frequent and prolonged skin contact and contact with eyes. Provide adequate ventilation to avoid mist or aerosol. Don't smoke or use spare flames; avoid contact with spark or other sources of ignition. Don't work near open container to avoid high concentration of vapours. Don't eat or drink during use.

Storage

Store under cover in the original container securely closed away from heat and sources of ignition. Do not store in the open air. Assure a correct ventilation of premises and the control of possible leak. Keep out of flame or spark and avoid the accumulation of electrostatic charges. Keep out of reach of children and away from food and drink.

Hygiene

Don't eat or drink during use.

Fire prevention

Don't smoke or use spare flames; avoid contact with spark or other sources of ignition. Keep out of flame or spark and avoid the accumulation of electrostatic charges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Avoid production and diffusion of mist and aerosol with utilization of localized ventilation/aspiration or other required precautions.

Hands

Wear suitable gloves (i.e. neoprene, nitrile). Gloves should be changed when they show wear. The kind of gloves and the term of use must be decided from employer with regard to processing and to allow for DPI legislation and glove producer's indications. Wear gloves only with clean hands.

Eyes

Chemical goggles and face shield in case of oil splashes.

Respiratory

None required under normal conditions of use. Use approved full face respirator with organic vapour filter cartridge if the recommended exposure limits are exceeded.

Skin/Body

Wear suitable protective clothing (for further information, refer to CEN-EN 14605); change it immediately in case of large contamination and wash it before subsequent use.

Environmental

Adopt all required precaution to avoid product immission in environment (e.g., blasting systems, catch basins, ...). Refer to technical precautions and also to sections 6.2, 6.3, 7.2, 12 and 13.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
LIQUID
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
VISCOUS AMBER
Colour
AMBER
Colour Intensity
---
Form
---
Odor
NOT RELEVANT
Odor Threshold
NOT RELEVANT
Ph
N.A.
Melting Point
N.A.
Boiling Point
>300 °C (572 °F)
Flash Point
262 °C (504 °F)
Freezing Point
N.A.
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
N.A.
Vapor Pressure
N.A.
Vapor Density
N.A.
Relative Density
---
Bulk Density
---
Density
0.8997 g/cm3
Flammability
N.A.
Upper Explosive Limit
N.A.
Lower Explosive Limit
N.A.
Explosive Limits
---
Auto Ignition Temperature
N.A.
Decomposition Temperature
N.A.
Solubility
---
Partition Coefficient
N.A.
Solubility In Water
IMMISCIBLE
Solubility In Fat
N.A.
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
30.35 cSt (at 100°C), 459.2 cSt (at 40°C)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under normal conditions of use.

Hazardous reactions

Not expected under normal conditions of use.

Avoid

This product must be kept far from heat sources. In any case, avoid exposing product to temperatures above the flash point.

Incompatible

Strong oxidizing agents, hard acids and bases.

Decomposition

Oxides of carbon, compounds of sulphur, phosphorus, nitrogen and hydrogen sulfide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Recover if possible. Dispose via authorised person/licensed waste disposal contractor.

Disposal

Dispose in accordance with local or national regulations via authorised person/licensed waste disposal contractor. Recover if possible.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for PETRONAS GEAR MEP 460?

The signal word is no signal word.

What is the physical form of PETRONAS GEAR MEP 460?

PETRONAS GEAR MEP 460 is a liquid appearing as viscous amber with amber color. It has not relevant odor.

What is PETRONAS GEAR MEP 460 used for?

Gear fluid

What are the hazard statements for PETRONAS GEAR MEP 460?

This substance has 1 hazard statement:

  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of PETRONAS GEAR MEP 460?

The melting point is N.A. and the boiling point is >300 °C (572 °F).