Molybube 87 EP 2

In cases of exposure to high concentrations of vapors, smoke or aerosols. Remove the patient to fresh air and keep warm and quiet.

After skin contact, wash with soap and water.

Wash immediately with copious quantities of water, holding the eyelids open for at least 15 minutes. Obtain medical help.

Special treatment not usually necessary. DO NOT INDUCE VOMITING.

Foam, CO2, powder.

Water jet

Incomplete combustion and thermal decomposition produce gases such as carbon monoxide, carbon dioxide, smoke and hydrocarbons.

Because of abundant production of smoke and dangerous fumes, the use of self-contained breathing apparatus is mandatory.

Installations should be designed to take all necessary precautions to avoid pollution of water and soil, to minimize risk of pollution, protect sewer inlets from spillage.

Use physical means to recover spillage, such as pumping, vacuuming, shoveling, etc.

In case of possible formation of vapor, mists or aerosols, assure adequate ventilation. Keep away from other combustible materials and oxidizers. Store the product away from food and drink. Do not smoke, eat, or apply cosmetics in areas where this material is used or applied. Rags impregnated with the product, paper or material used to mop up spillage, present a fire risk. Do not allow these articles to accumulate, dispose of them safely, immediately after use. Prolonged and repeated contact with the skin can provoke skin irritation. After contact with the skin wash with soap and water. Immediately remove all clothes which have been splashed or soiled. Do not breath vapors, mists or fumes.

Store at ambient temperature away from water, moisture and all sources of ignition. Keep containers closed when not in use. Avoid non-weatherproof storage.

Do not smoke, eat, or apply cosmetics in areas where this material is used or applied. After contact with the skin wash with soap and water. Immediately remove all clothes which have been splashed or soiled.

Rags impregnated with the product, paper or material used to mop up spillage, present a fire risk. Do not allow these articles to accumulate, dispose of them safely, immediately after use. Design installations to avoid: Accidental spraying of the product onto hot surfaces or live electrics.

Impervious gloves resistant to hydrocarbons.

Goggles or safety glasses with side shields, in case of risk of splashing.

If necessary, wear mask (respirator)

If necessary, wear boots, clothing impervious to hydrocarbons, safety shoes for the handling of drums.

Product is stable at normal use and storage temperatures in handling and use.

Heat (temperature greater than the flash point) sparks, source of ignition, flames

Strong oxidizers.

Products of incomplete combustion or thermal degradation produce more or less toxic gases such as carbon monoxide, carbon dioxide, smoke,.

Waste recovery, recycling or incineration in approved installation.

Waste recovery, recycling or incineration in approved installation.