NextSDS Logo
Safety Data Sheet EN

RAFINOL 930 FF

CAS 70131-50-9
EC 274-324-8

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
RAFINOL 930 FF
Synonyms
BENTONITE, ACID-LEACHED

Regulatory Identifiers

CAS Number
70131-50-9 Check regulations →
EC Number
274-324-8 Check regulations →

Identified Uses

Not available.

Uses advised against

None known.

Manufacturers & Suppliers

A

AMCOL MINERAL MADENCILIK SANAYI VE TICARET ANONIM SIRKETI

Atatürk mah. Ataşehir Bulvarı, Gardenya Plaza 3. No:20 Kat : 13, 34758 Ataşehir, Istanbul, Turkey

+90 216 4149616

Emergency Contacts

EU Emergency No

00 1 760 476 3961

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified
Not Classified
Not Classified

GHS Pictograms

Hazard Statements

The substance does not meet the criteria for classification.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.
P401 Store away from incompatible materials.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

BENTONITE, ACID LEACHED is the main substance. Contains constituents Quartz and Cristobalite.

Chemical Name CAS Number Concentration Hazardous
BENTONITE, ACID LEACHED EC: 274-324-8 70131-50-9 100% No
Quartz EC: 238-878-4 14808-60-7 6% No
Cristobalite EC: 238-455-4 14464-46-1 2% No

Notes

Occupational Exposure Limits for constituents are listed in Section 8. Occupational Exposure Limits for impurities are listed in Section 8. The full text for all H-statements is displayed in section 16. This product contains naturally occurring crystalline silica (not listed in Annex I of Directive 67/548/EEC) in quantities less than 6%.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If symptoms are experienced, remove source of contamination or move victim to fresh air. If the affected person is not breathing, apply artificial respiration. If breathing is difficult, give oxygen. Call a physician if symptoms develop or persist.

Symptoms: Dusts may irritate the respiratory tract.

Skin contact

No special measures required. Get medical attention if irritation develops or persists.

Symptoms: Dusts may irritate skin.

Eye contact

Do not rub eyes. Flush eyes immediately with large amounts of water. Get medical attention if irritation develops or persists.

Symptoms: Dusts may irritate eyes.

Ingestion

No special measures required. If ingestion of a large amount does occur, seek medical attention.

Immediate Medical Attention

Call a physician if symptoms develop or persist (inhalation). Get medical attention if irritation develops or persists (skin/eye). Seek medical attention if ingestion of a large amount occurs.

Medical Treatment

Provide general supportive measures and treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical, CO2, water spray or regular foam. Use any media suitable for the surrounding fires.

Unsuitable media

Do not use water jet as an extinguisher, as this will spread the fire.

Specific hazards

During fire, gases hazardous to health may be formed.

Instructions

Use water spray to cool unopened containers. Use standard firefighting procedures and consider the hazards of other involved materials.

Firefighter Protection

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep unnecessary personnel away. Use personal protection recommended in Section 8 of the SDS.

Small spill

Sweep up or vacuum up spillage and collect in suitable container for disposal. None necessary. Reduce airborne dust and prevent scattering by moistening with water.

Large spill

Wet down with water and dike for later disposal. Shovel the material into waste container. Following product recovery, flush area with water.

Environmental

Avoid discharge into drains, water courses or onto the ground.

Cleanup methods

Collect dust using a vacuum cleaner equipped with HEPA filter. Collect dust or particulates using a vacuum cleaner with a HEPA filter.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Minimise dust generation and accumulation. Provide appropriate exhaust ventilation at places where dust is formed. In case of insufficient ventilation, wear suitable respiratory equipment. Practice good housekeeping.

Storage

Store in tightly closed container. Store in a well-ventilated place. No special storage conditions required. Guard against dust accumulation of this material. Keep out of the reach of children. Store away from incompatible materials (see Section 10 of the SDS).

Hygiene

Practice good housekeeping.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

If material is ground, cut, or used in any operation which may generate dusts, use appropriate local exhaust ventilation to keep exposures below the recommended exposure limits.

Hands

Applicable for industrial settings only. Wear appropriate chemical resistant gloves.

Eyes

Applicable for industrial settings only. Wear dust goggles. Wear dust goggles.

Respiratory

Applicable for industrial settings only. Wear respirator with dust filter. Use a particulate filter respirator for particulate concentrations exceeding the Occupational Exposure Limit.

Skin/Body

No special protective equipment required. Applicable for industrial settings only.

Environmental

No special measures required.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid.
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
Various.
Colour Intensity
---
Form
Powder. Various.
Odor
None.
Odor Threshold
Not available.
Ph
3 - 4,5
Melting Point
Not available.
Boiling Point
Not available.
Flash Point
Not available.
Freezing Point
Not available.
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available.
Vapor Pressure
Not available.
Vapor Density
Not available.
Relative Density
Not available.
Bulk Density
---
Density
---
Flammability
Not available.
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not available.
Decomposition Temperature
Not available.
Solubility
Not available.
Partition Coefficient
Not available.
Solubility In Water
Not available.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

The product is stable and non-reactive under normal conditions of use, storage and transport.

Hazardous reactions

Will not occur.

Avoid

None known. Contact with incompatible materials.

Incompatible

None known.

Decomposition

None known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions).

Disposal

Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose in accordance with all applicable regulations. Material should be recycled if possible.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is RAFINOL 930 FF known by?

RAFINOL 930 FF is also known as: BENTONITE, ACID-LEACHED

What is the hazard signal word for RAFINOL 930 FF?

The signal word is no signal word.

What is the physical form of RAFINOL 930 FF?

RAFINOL 930 FF is a solid. with various. color. It has none. odor.

What is the solubility of RAFINOL 930 FF?

Not available.

What is RAFINOL 930 FF used for?

Not available.

What are the hazard statements for RAFINOL 930 FF?

This substance has 1 hazard statement:

  • The substance does not meet the criteria for classification.

What is the melting point of RAFINOL 930 FF?

The melting point is Not available. and the boiling point is Not available..