Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SILIKAL R 17 Hardener
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Repair mortar, Acrylic resin
Manufacturers & Suppliers
Silikal America
manufacturer
609-B Fertilla Street, Carrolton, GA 30117
770.830.1404
Emergency Contacts
INFOTRAC
1-800-535-5053
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS07
GHS08
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and to be sure call for a doctor.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink copious amounts of water and provide fresh air. Immediately call a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Sand, CO2, extinguishing powder or water spray. Fight larger fire with alcohol resistant foam.
Water with full jet
Exothermic polymerization.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Do not flush with water or aqueous cleansing agents
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace.
Store only in the original receptacle. Store in cool, dry conditions in well sealed receptacles. Store receptacle in a well ventilated area. Protect from heat and direct sunlight.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Workplace must be properly ventilated and monitored to maintain air quality below the TLV.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation (EN 374). Material of gloves: Butyl rubber, BR. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. For the mixture of chemicals mentioned below the penetration time has to be at least 60 minutes (Permeation according to EN 374 Part 3: Level 3).
Tightly sealed goggles
Organic vapour respirators are required only when levels meet or exceed these values. A self-contained breathing apparatus is required in confined spaces. Filter AX or Organic Vapour Cartridge. Recommended filter device for short term use: Filter A
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
Exothermic polymerization.
Keep away from heat and direct sunlight.
Reacts with peroxides and other radical forming substances.
Hydrocarbons, Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be specially treated adhering to official regulations.
Must not be disposed of together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1247
- Shipping Name
- Methyl methacrylate monomer, stabilized
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids
Warning: Flammable liquids
Warning: Flammable liquids
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SILIKAL R 17 Hardener?
The signal word is danger.
What is the physical form of SILIKAL R 17 Hardener?
SILIKAL R 17 Hardener is a fluid appearing as fluid, colorless with colorless color. It has unpleasant odor.
What is SILIKAL R 17 Hardener used for?
Repair mortar, Acrylic resin
What are the hazard statements for SILIKAL R 17 Hardener?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapor.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H335: May cause respiratory irritation.
- H373: May cause damage to organs through prolonged or repeated exposure.
What is the melting point of SILIKAL R 17 Hardener?
The melting point is Undetermined. and the boiling point is 100 °C (212 °F).