Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SEAL & BOND FLEX-SIL RED 202ml PRESSPACK
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Not applicable (mixture)
Identified Uses
Sealant
Uses advised against
No uses advised against known
Manufacturers & Suppliers
Novatio International
national supplier
Industrielaan 5D, B-2250 Olen
+32 14 25 76 40
Novatio International
manufacturer
Industrielaan 5D, B-2250 Olen
+32 14 25 76 40
Emergency Contacts
BIG
+32 14 58 45 45
24h/24h
EN, FR, DE, NL
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| diacetoxydi-tert-butoxysilane EC: 236-112-3 | 13170-23-5 | 1 - 2% | Yes |
| methylsilanetriyl triacetate EC: 224-221-9 | 4253-34-3 | 1 - 3% | Yes |
| norflurane EC: 212-377-0 | 811-97-2 | 5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.
Symptoms: No effects known.
Rinse with water. Soap may be used. Take victim to a doctor if irritation persists.
Symptoms: No effects known.
Rinse with water. Take victim to an ophthalmologist if irritation persists.
Symptoms: No effects known.
Rinse mouth with water. Immediately after ingestion: give lots of water to drink. Do not induce vomiting. Consult a doctor/medical service if you feel unwell.
Symptoms: No effects known.
Immediate Medical Attention
If applicable and available it will be listed below.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Keep away from naked flames/heat. Carry operations in the open/under local exhaust/ventilation or with respiratory protection.
Gloves.
Safety glasses.
Respiratory protection not required in normal conditions.
Protective clothing.
See headings 6.2, 6.3 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- Aerosols
- Transport Class
- 2.2
Special provisions: 63, 190, 277, 327, 344, 959. Limited quantities: Combination packagings: not more than 1 liter per inner packaging for liquids. A package shall not weigh more than 30 kg. (gross mass)
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SEAL & BOND FLEX-SIL RED 202ml PRESSPACK?
The signal word is no signal word.
What is the physical form of SEAL & BOND FLEX-SIL RED 202ml PRESSPACK?
SEAL & BOND FLEX-SIL RED 202ml PRESSPACK is a paste with red color. It has irritating/pungent odour, vinegar odour odor.
What is the solubility of SEAL & BOND FLEX-SIL RED 202ml PRESSPACK?
water ; insoluble
What is SEAL & BOND FLEX-SIL RED 202ml PRESSPACK used for?
Sealant
What is the melting point of SEAL & BOND FLEX-SIL RED 202ml PRESSPACK?
The melting point is No data available and the boiling point is No data available.