FLUXO 3 AEROSOL

Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner. Watch out for any remaining product between skin and clothing, watches, shoes, etc.

Symptoms: allergic reaction

Wash thoroughly with fresh, clean water for 15 minutes holding the eyelids open.

Symptoms: redness, pain or visual impairment

Do not give the patient anything orally. Do not allow to drink, do not induce vomiting and transfer to hospital immediately by ambulance. Seek medical attention, showing the label.

Chemical powders, carbon dioxide and other extinguishing gas are suitable for small fires.

A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health.

Keep packages cool when in the vicinity of flames.

Avoid any contact with the skin and eyes.

Prevent any material from entering drains or waterways.

Retrieve the product by mechanical means (sweeping/vacuuming).

Always wash hands after handling. Remove and wash contaminated clothing before re-using. Never inhale this mixture. Prevent access by unauthorised personnel.

Requirements relating to storage premises apply to all facilities where the mixture is handled. Keep packages tightly closed and away from sources of heat, sparks and naked flames.

Always wash hands after handling. Remove and wash contaminated clothing before re-using.

Do not spray on a naked flame or any incandescent material. Do not pierce or burn, even after use. Use the mixture in premises free of naked flames or other sources of ignition. Keep packages tightly closed and away from sources of heat, sparks and naked flames. Do not use tools which may produce sparks. Do not smoke.

Ensure that there is adequate ventilation, especially in confined areas.

Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN ISO 374-1. Gloves must be selected according to the application and duration of use at the workstation. Protective gloves need to be selected according to their suitability for the workstation in question: other chemical products that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required.

Avoid contact with eyes. Use eye protectors designed to protect against liquid splashes. Before handling, wear safety goggles in accordance with standard EN166. Before handling powders or dust emission, wear mask goggles in accordance with standard EN166.

Do not breathe in aerosols. Avoid inhaling dust. Wear a disposable half-mask dust filter in accordance with standard EN149/A1.

Avoid skin contact. Wear suitable protective clothing. In the event of substantial spatter, wear liquid-tight protective clothing against chemical risks (type 3) in accordance with EN14605/A1 to prevent skin contact. Wear protective clothing against solid chemicals and particles suspended in the air (type 5) in accordance with standard EN13982-1/A1 to prevent skin contact. In the event of a risk of splashing, wear protective clothing against chemical risks (type 6) in accordance with EN13034/A1 to prevent skin contact.

This mixture is stable under the recommended handling and storage conditions in section 7.

No data available.

No data available.

Any apparatus likely to produce a flame or to have a metallic surface at high temperature (burners, electric arcs, furnaces etc.) must not be allowed on the premises. Avoid : - heating - heat - formation of dusts. Dusts can form an explosive mixture with air.

No data available.

The thermal decomposition may release/form : carbon monoxide (CO) carbon dioxide (CO2)

Proper waste management of the mixture and/or its container must be determined in accordance with Directive 2008/98/EC.

Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.

190 327 344 625

63 190 277 327 344 381 959