NextSDS Logo
Safety Data Sheet EN

InSpec IPA

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
InSpec IPA

Regulatory Identifiers

CAS Number
N/A

Identified Uses

For professional uses only. AISE-P314 – Surface disinfectant (manual process). AISE-P315 – Surface disinfectant (spray and rinse manual process).

Uses advised against

Uses other than those identified are not recommended.

Manufacturers & Suppliers

R

Redditch Medical (a division of Entaco Ltd)

manufacturer

Unit 90 Heming Rd, Washford, Redditch, B98 0EA, United Kingdom

Emergency Contacts

Redditch Medical (a division of Entaco Ltd)

+44 (0) 1527 830940

office hours, UK

Redditch Medical (a division of Entaco Ltd)

+44 (0) 7377 544472

out-of-office hours, UK

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Highly flammable liquid and vapour.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P210 Keep away from heat / sparks / open flames / hot surfaces. No smoking.
P233 Keep container tightly closed.
P261 Avoid breathing fume / mist / vapour / spray.
P264 Wash hands thoroughly after use.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403 + P235 Store in a well-ventilated place. Keep cool.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Propan-2-ol EC: 200-661-7 67-63-0 50 - 75% Yes

For full text of Hazard (H) statements see Section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove affected person to fresh air and keep at rest in position comfortable for breathing. Call a POISON CENTRE or doctor / physician if affected person feels unwell.

Symptoms: May cause drowsiness or dizziness.

Skin contact

Wash skin with plenty of lukewarm, gently flowing water. Take off immediately contaminated clothing and wash it before re-use. If skin irritation occurs: Get medical advice / attention.

Symptoms: No known effects or symptoms in normal use.

Eye contact

If in eyes immediately rinse cautiously with lukewarm water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice / attention.

Symptoms: Causes severe irritation.

Ingestion

Rinse mouth out with water. Give plenty of water to drink. Get medical advice / attention if affected person feels unwell.

Symptoms: No known effects or symptoms in normal use.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use only outdoors or in well-ventilated areas / provide adequate general and local exhaust. Avoid direct contact and / or splashes where possible. Train personnel.

Hands

Wash hands thoroughly after handling. For prolonged contact, protection for the skin may be necessary.

Eyes

Safety glasses are not normally required. However, their use is recommended in cases where splashes may occur when handling the product.

Respiratory

Respiratory protection is not normally required. However, inhalation of vapour, spray, gas or aerosols should be avoided.

Skin/Body

No special requirements under normal use conditions.

Environmental

Should not reach sewage water or drainage ditch undiluted or unneutralised

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Cloud Point
---
Odor
Product specific.
Boiling Point
- 70 [o] C
Dynamic Viscosity
---
Ph
_ca._ 7 Neat.
Bulk Density
---
Appearance
---
Explosive Limits
---
Melting Point
Not available.
Partition Coefficient
Not available.
Metal Corrosion
---
Molecular Weight
---
Vapor Density
Not available.
Decomposition Temperature
Not available.
Physical State
Liquid.
Odor Threshold
---
Freezing Point
Not available.
Voc Content
---
Form
---
Kinematic Viscosity
---
Colour Intensity
---
Colour
Clear, colourless.
Density
0.88 g/cm [3] @ 20 [o] C.
Properties Status
---
Relative Evaporation Rate
---
Solubility In Fat
---
State Under Standard Conditions
---
Crystallisation Point
---
Relative Density
Not available.
Flammability
Not available.
Physical State Data
liquid
Evaporation Rate
Not available.
Vapor Pressure
Not available.
Upper Explosive Limit
Not available.
Flash Point
_ca._ 19 [o] C Closed cup.
Solubility In Water
Fully miscible with water.
Solidification Point
---
Softening Point
---
Auto Ignition Temperature
Not available.
Lower Explosive Limit
Not available.
Solubility
Fully miscible with water.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1219
Shipping Name
ISOPROPANOL (ISOPROPYL ALCOHOL) (solution)
Transport Class
3
Packing Group
II
ADR

None known

IMDG

None known

IATA

None known

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for InSpec IPA?

The signal word is danger.

What is the physical form of InSpec IPA?

InSpec IPA is a liquid. with clear, colourless. color. It has product specific. odor.

What is the solubility of InSpec IPA?

Fully miscible with water.

What is InSpec IPA used for?

For professional uses only. AISE-P314 – Surface disinfectant (manual process). AISE-P315 – Surface disinfectant (spray and rinse manual process).

What are the hazard statements for InSpec IPA?

This substance has 3 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.

What is the melting point of InSpec IPA?

The melting point is Not available. and the boiling point is - 70 [o] C.