Liquid Pyrolysis Products; Residues (petroleum), steam-cracked light, arom.

If a person breathes in large amounts of this chemical, move the exposed person to fresh air at once. Keep the affected person at rest. Get medical attention.

Symptoms: The substance is irritating to the respiratory tract. The substance may cause effects on the central nervous system (CNS).

Remove contaminated clothes. Rinse skin with plenty of water or shower. Get medical attention.

Symptoms: The substance irritates the skin. Liquid defats the skin. Repeated contact with skin may cause dermatitis.

Check the affected person for contact lenses and remove contact lenses if easily possible. Rinse with plenty of water for several minutes. Get medical attention.

Symptoms: The substance irritates the eyes.

Important: never give anything by mouth to an unconscious person! Rinse mouth. Do not induce vomiting. Get medical attention.

Symptoms: Swallowing the liquid may cause aspiration into the lungs with the risk of chemical pneumonitis.

Foam, dry chemical, carbon dioxide, water spray/mist.

Do not use water jet (straight streams) to extinguish.

Highly Flammable liquid. Will be easily ignited by heat, sparks or flames. Flash point is between -20°C and -5°C (closed cup). Self-ignition temperature: 480°C. Vapours may form explosive mixtures with air. Explosive limits, vol% in air: 0.75-12. The vapour may be invisible and is heavier than air. The vapour may travel to source of ignition and flash back. The vapour may spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapour explosion hazard indoors, outdoors or in sewers. Containers may explode when heated. Runoff to sewer may create fire or explosion hazard. Fire will produce irritating, corrosive and/or toxic gases.

Use water spray to knock down fire fumes if possible. Cool containers with flooding quantities of water until well after fire is out. Apply water from as far a distance as possible.

Keep sparks, flames, and other sources of ignition away. Attempt to stop leak if without undue personnel hazard. Avoid breathing vapors or mist. Keep upwind. Ensure adequate ventilation. Do not touch or walk through spilled material. Do not handle broken packages without protective equipment. Wash away any material, which may have contacted the body with copious amounts of water or soap and water. Work clothing that becomes wet should be immediately removed due to its flammability hazard. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent and remove to safe place. Beware of vapours accumulating to form explosive concentrations. Ventilate sewers and basements where there is no risk to personnel or public. Do not wash away into sewer. Keep material out of water sources and sewers. Build dikes to contain flow as necessary. Use water spray or mist to disperse vapors. Do not let this chemical enter the environment.

Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent and remove to safe place.

Dig a pit, pond, lagoon, holding area to contain liquid or solid material. Dike surface flow using soil, sand bags. Contain spilled liquid with sand or earth. Do not use combustible materials such as sawdust. Recover by pumping (use an explosion proof motor or hand pump), or by using a suitable absorbent.

Do not let this chemical enter the environment. Keep material out of water sources and sewers.

Recover by pumping (use an explosion proof motor or hand pump), or by using a suitable absorbent.

Materials: sand, inert absorbent, suitable adsorbents

Any person who comes into contact with the substance needs to be trained in proper handling and safety per applicable federal, state and local laws and regulations. Employers must advise employees of all areas and operations where exposure to the substance might occur. Avoid contact with skin and eyes. Handle in accordance with good industrial hygiene and safety practice.

Store in a cool, dry, well-ventilated area. Store in tightly closed containers. Keep away from heat, sparks, and flames.

Do not eat, drink, or smoke during work. Wash hands before eating, after handling the substance, before breaks and at the end of workday. The worker should immediately wash the skin when it becomes contaminated. Work clothing that becomes wet should be immediately removed due to its flammability hazard.

Normal measures for preventive fire protection when handling highly flammable liquid substances. Keep sparks, flames, and other sources of ignition away. No smoking. Take measures to prevent the build up of electrostatic charge.

Engineering controls should be sufficient to reduce exposures to this chemical to the lowest level achievable.

Handle with appropriate gloves. Gloves must be inspected prior to use. Use proper glove removal method –without touching glove's outer surface –to avoid skin contact with this product.

If there is a potential that this chemical can come in contact with eye or skin, appropriate eye and skin protective equipment shall be provided and used. Appropriate eye and face protection may be necessary to prevent contact with this substance. Suitable protective clothing and eye protection should be in accordance with national, or regional standards and regulations.

Personal Protective Equipment/ Respiratory Protection: should be used in accordance with company and applicable national regulatory requirements. Respiratory protection should be used to supplement the engineering controls and work practices. Persons should not be assigned to tasks requiring the use of respirators unless it has been determined they are physically able to perform the work and are trained to use the equipment.

If there is a potential that this chemical can come in contact with eye or skin, appropriate eye and skin protective equipment shall be provided and used. Suitable protective clothing and eye protection should be in accordance with national, or regional standards and regulations. The level of protection selected should be based on the potential substance concentration and likelihood of contact/ exposure. All protective clothing shall be well aired and inspected for physical defects before re-use. Take off contaminated clothing and wash before re-use.

Stable under recommended storage and use conditions.

Vigorous reactions, sometimes amounting to explosions, can result from the contact between aromatic hydrocarbons components of this product and strong oxidizing agents. Aromatic hydrocarbons components of this product can react exothermically with bases and with diazo compounds.

Heat, flames and sparks, elevated temperatures.

acids, bases, halogens, strong oxidizing agents, metallic salts.

Carbon oxides.

The transportation, storage, treatment, and disposal of this waste material must be conducted in compliance with local regulations for hazardous wastes. Disposal can occur only in properly permitted facilities. Contact a licensed professional waste disposal service to dispose of this substance.

Contact a licensed professional waste disposal service to dispose of this substance.

A number of restrictions may apply to materials subject to local/national/regional classifications requirements. Please refer to the appropriate regulation for specific details regarding classification requirements and restrictions.

A number of restrictions may apply to materials subject to local/national/regional classifications requirements. Please refer to the appropriate regulation for specific details regarding classification requirements and restrictions.

A number of restrictions may apply to materials subject to local/national/regional classifications requirements. Please refer to the appropriate regulation for specific details regarding classification requirements and restrictions.