Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PIB/ Polybutene, Polybut X2, Polybut X10, Polybut X35, Polybut 0, Polybut 0 E, Polybut 06, Polybut 09, Polybut 010, Polybut 025, Polybut 04, Polybut 5, Polybut HV 35, Polybut 10, Polybut 28, Polybut 30, Polybut 32, Polybut 80, Polybut 120, Polybut 150, Polybut 200, Polybut 600.
- Product Form
- Substance
- Product Code
- PIB 2, PIB 4, PIB 5, PIB 6, PIB 8, PIB 8K, PIB 10, PIB 12, PIB 16, PIB 18, PIB 20 PIB 24, PIB 28, PIB 30, PIB 32, PIB 80, PIB 120, PIB 122, PIB 126, PIB 128, PIB 240.
Regulatory Identifiers
- CAS Number
- 9044-17-1 Check regulations →
- EC Number
- Not applicable Check regulations →
- REACH No.
- exempt
Identified Uses
Manufacture of substances
Uses advised against
No additional information available
Manufacturers & Suppliers
Kemat Belgium
manufacturer
Rue de la sablonniere 7, B-1000 Brussels - Belgium
http://www.kematbelgium.com
Emergency Contacts
Emergency Contact
+32 2 219 48 11
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Butene, polymer with 2-methyl-1-propene | 9044-17-1 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air. In case of irregular breathing or respiratory arrest provide artificial respiration. Seek medical advice.
Symptoms: The product decreases available oxygen, causes suffocation.
In case of contact with cold material: . Wash skin with plenty of water and soap. In case of contact with hot material: . Rinse immediately with plenty of water for 15 minutes. Seek immediate medical advice.
Symptoms: Hot material can cause burns.
In case of contact with cold material: . Rinse immediately with plenty of water. In case of contact with hot material: . Rinse immediately with plenty of water for 15 minutes. Seek medical advice.
Symptoms: Hot material can cause burns.
Do not induce vomiting. Drain stomach by gastric lavage under qualified medical supervision. Immediately get medical attention.
Symptoms: Ingestion may cause nausea and vomiting. Central nervous system depression. Convulsions. Death.
Medical Treatment
Drain stomach by gastric lavage under qualified medical supervision. In case of burn skin, to minimize physical damage to the skin, do not remove the polybutene. Cover the injured area with appropriate burn gel.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Either local exhaust or general room ventilation is usually required. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure.
Wear suitable gloves tested to EN374.
Wear chemical goggles if material is handled hot. Not required for normal conditions of use. DIN EN 166.
In case of inadequate ventilation wear respiratory protection. half-mask with filter according to EN 149.
When skin contact is possible, protective clothing including gloves, apron, sleeves, boots, head and face protection must be worn.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3257
- Shipping Name
- ELEVATED TEMPERATURE LIQUID, N.O.S.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PIB/ Polybutene, Polybut X2, Polybut X10, Polybut X35, Polybut 0, Polybut 0 E, Polybut 06, Polybut 09, Polybut 010, Polybut 025, Polybut 04, Polybut 5, Polybut HV 35, Polybut 10, Polybut 28, Polybut 30, Polybut 32, Polybut 80, Polybut 120, Polybut 150, Polybut 200, Polybut 600.?
The signal word is no signal word.
What is the physical form of PIB/ Polybutene, Polybut X2, Polybut X10, Polybut X35, Polybut 0, Polybut 0 E, Polybut 06, Polybut 09, Polybut 010, Polybut 025, Polybut 04, Polybut 5, Polybut HV 35, Polybut 10, Polybut 28, Polybut 30, Polybut 32, Polybut 80, Polybut 120, Polybut 150, Polybut 200, Polybut 600.?
PIB/ Polybutene, Polybut X2, Polybut X10, Polybut X35, Polybut 0, Polybut 0 E, Polybut 06, Polybut 09, Polybut 010, Polybut 025, Polybut 04, Polybut 5, Polybut HV 35, Polybut 10, Polybut 28, Polybut 30, Polybut 32, Polybut 80, Polybut 120, Polybut 150, Polybut 200, Polybut 600. is a liquid appearing as clear, colorless liquid. with colourless. color. It has no data available odor.
What is PIB/ Polybutene, Polybut X2, Polybut X10, Polybut X35, Polybut 0, Polybut 0 E, Polybut 06, Polybut 09, Polybut 010, Polybut 025, Polybut 04, Polybut 5, Polybut HV 35, Polybut 10, Polybut 28, Polybut 30, Polybut 32, Polybut 80, Polybut 120, Polybut 150, Polybut 200, Polybut 600. used for?
Manufacture of substances
What is the melting point of PIB/ Polybutene, Polybut X2, Polybut X10, Polybut X35, Polybut 0, Polybut 0 E, Polybut 06, Polybut 09, Polybut 010, Polybut 025, Polybut 04, Polybut 5, Polybut HV 35, Polybut 10, Polybut 28, Polybut 30, Polybut 32, Polybut 80, Polybut 120, Polybut 150, Polybut 200, Polybut 600.?
The melting point is No data available and the boiling point is No data available.