NextSDS Logo
Safety Data Sheet EN

2-Hexanone

CAS 591-78-6

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
2-Hexanone
Product Code
AC146880000; AC146880025; AC146881000; AC146885000
Synonyms
Butyl methyl ketone; Methyl butyl ketone

Regulatory Identifiers

CAS Number
591-78-6 Check regulations →

Identified Uses

Laboratory chemicals.

Uses advised against

Food, drug, pesticide or biocidal product use.

Manufacturers & Suppliers

F

Fisher Scientific

distributor

One Reagent Lane, Fair Lawn, NJ 07410

(201) 796-7100

A

Acros Organics

manufacturer

One Reagent Lane, Fair Lawn, NJ 07410

Emergency Contacts

Emergency Contact

001-201-796-7100

Emergency Contact

+32 14 57 52 99

CHEMTREC

001-800-424-9300

CHEMTREC

001-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3
Repr. Cat. 2
STOT SE Cat. 3
STOT RE Cat. 1

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapor
H336 May cause drowsiness or dizziness
H361f Suspected of damaging fertility
H372 Causes damage to organs through prolonged or repeated exposure

Precautionary Statements

P201 Obtain special instructions before use
P202 Do not handle until all safety precautions have been read and understood
P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking
P233 Keep container tightly closed
P235 Keep cool
P240 Ground/bond container and receiving equipment
P241 Use explosion-proof electrical/ventilating/lighting/equipment
P242 Use only non-sparking tools
P243 Take precautionary measures against static discharge
P260 Do not breathe dust/fume/gas/mist/vapors/spray
P264 Wash face, hands and any exposed skin thoroughly after handling
P270 Do not eat, drink or smoke when using this product
P271 Use only outdoors or in a well-ventilated area
P281 Use personal protective equipment as required
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower
P304 + P341 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
P308 + P313 IF exposed or concerned: Get medical attention/advice
P370 + P378 In case of fire: Use CO2, dry chemical, or foam for extinction
P403 + P233 Store in a well-ventilated place. Keep container tightly closed
P405 Store locked up
P501 Dispose of contents/container to an approved waste disposal plant

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
2-Hexanone 591-78-6 98% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If breathing is difficult, give oxygen.

Symptoms: Difficulty in breathing. Symptoms of overexposure may be headache, dizziness, tiredness, nausea and vomiting.

Skin contact

Wash off immediately with plenty of water for at least 15 minutes.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.

Ingestion

Do NOT induce vomiting.

Symptoms: Symptoms of overexposure may be headache, dizziness, tiredness, nausea and vomiting.

Immediate Medical Attention

Get medical attention.

Medical Treatment

Treat symptomatically

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation, especially in confined areas. Use explosion-proof electrical/ventilating/lighting/equipment. Ensure that eyewash stations and safety showers are close to the workstation location.

Hands

Wear appropriate protective gloves and clothing to prevent skin exposure.

Eyes

Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.

Respiratory

Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Skin/Body

Wear appropriate protective gloves and clothing to prevent skin exposure.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Light yellow
Colour
Light yellow
Colour Intensity
---
Form
---
Odor
pungent
Odor Threshold
No information available
Ph
No information available
Melting Point
-57 C / -70.6 F
Boiling Point
127 C / 260.6 F
Flash Point
23 C / 73.4 F
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No information available
Vapor Pressure
20 @ 10 mmHg C
Vapor Density
3.5 (Air = 1.0)
Relative Density
0.810
Bulk Density
---
Density
---
Flammability
Not applicable
Upper Explosive Limit
8.00 vol %
Lower Explosive Limit
1.2 vol %
Explosive Limits
---
Auto Ignition Temperature
423 C / 793.4 F
Decomposition Temperature
No information available
Solubility
No information available
Partition Coefficient
No data available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
100.16
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1224
Shipping Name
KETONES, LIQUID, N.O.S.
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is 2-Hexanone known by?

2-Hexanone is also known as: Butyl methyl ketone; Methyl butyl ketone

What is the hazard signal word for 2-Hexanone?

The signal word is danger.

What is the physical form of 2-Hexanone?

2-Hexanone is a liquid appearing as light yellow with light yellow color. It has pungent odor.

What is the solubility of 2-Hexanone?

No information available

What is 2-Hexanone used for?

Laboratory chemicals.

What are the hazard statements for 2-Hexanone?

This substance has 4 hazard statements:

  • H226: Flammable liquid and vapor
  • H336: May cause drowsiness or dizziness
  • H361f: Suspected of damaging fertility
  • H372: Causes damage to organs through prolonged or repeated exposure

What is the melting point of 2-Hexanone?

The melting point is -57 C / -70.6 F and the boiling point is 127 C / 260.6 F.