Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- S-Care BHG
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Biocides
Manufacturers & Suppliers
Lonza Ltd
manufacturer
Muenchensteinerstrasse 38 CH-4002 Basel, Switzerland
+41 61 316 81 11
Emergency Contacts
Lonza Ltd
+41 61 313 94 94
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS05
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| BROOMCHLOORDIMETHYLHYDANTONE EC: 251-171-5 | 32718-18-6 | --- | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is irregular or stopped, administer artificial respiration. Give oxygen. First aider needs to protect himself. Call a physician immediately.
Take off all contaminated clothing immediately. After contact with skin, wash immediately with plenty of soap and water. Call a physician immediately.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Call a physician immediately.
Call a physician immediately. Clean mouth with water and drink afterwards plenty of water. Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Suitable material : Nitrile rubber Break through time : > 480 min Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
Tightly fitting safety goggles
In the case of dust or aerosol formation use respirator with an approved filter. Half mask with a particle filter P2 (EN 143)
Choose body protection according to the amount and concentration of the dangerous substance at the work place. No special protective equipment required.
Do not flush into surface water or sanitary sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3085
- Shipping Name
- Oxidizing solid, corrosive, n.o.s. (Bromochloro-5,5-dimethylimidazolidine-2,4-dione)
- Transport Class
- 5.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for S-Care BHG?
The signal word is danger.
What is the physical form of S-Care BHG?
S-Care BHG is a solid with white color. It has odourless odor.
What is S-Care BHG used for?
Biocides
What are the hazard statements for S-Care BHG?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H400: Very toxic to aquatic life.
What is the melting point of S-Care BHG?
The melting point is 156 - 162 C and the boiling point is Decomposition: yes Not applicable.