ISONONANOL

Move victims into fresh air. If symptoms persist, call a physician. In case of difficulties in breathing, supply oxygen. Employ artificial respiration if breathing ceases. Consult a physician immediately.

Wash off with plenty of water and soap immediately. Continue flushing with polyethylene glycol 400. If symptoms persist, call a physician.

Symptoms: Has skin-degreasing properties.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses if this can be easily done. Protect unharmed eye. See an eye specialist immediately.

Do not induce vomiting and seek medical advice immediately. Clean mouth with water and drink afterwards plenty of water.

Water spray, foam, CO2, dry powder.

high volume water jet

In case of fire cool endangered containers with water. Closed container may rupture if strongly heated. Heavier than air vapour. Formation of flammable or explosive vapour/air mixtures possible. Keep away from sources of ignition - No smoking.

Avoid contact with skin, eyes and clothing. Do not inhale vapours / aerosols.

Do not allow entrance in sewage water, drainage systems, stretches of water, soil. Avoid penetration into drainage system or in rooms situated at a lower level because of danger of explosion.

Take up mechanically or with an absorbent material. Fill into marked, sealable containers.

Materials: universal absorbent, diatomaceous earth, oil absorbent

The substance must be handled under strictly controlled conditions according to Article 18 of the REACH regulation: Product is only handled and chemically converted when tightly enclosed within a processing system. Use only trained personnel. Wear personal protective equipment; see section 8. Avoid contact with skin and eyes. Do not inhale vapours / aerosols. Ensure sufficient ventilation. Handle and open container with care.

Keep containers tightly closed in a cool, well-ventilated place.

Normal measures for preventive fire protection. Take precautionary measures against static discharges. Keep away from sources of ignition - No smoking. Ensure explosion proofness.

Provide for good ventilation if vapours/aerosols are formed.

Chemical-resistant protective gloves (EN 374). Glove material for example, butyl-rubber, Material thickness 0.5 mm, Break through time >= 480 min. Glove material for example, nitrile-butadiene rubber (NBR) gloves, Material thickness 0.35 mm, Break through time >= 480 min. Selection of protective gloves to meet the requirements of specific workplaces. Suitability for specific workplaces should be clarified with protective glove manufacturers.

close-fitting protective goggles (e.g. closed goggles) or face protection

In case of dusts/vapours/aerosols being formed or if the limit values like TLV are exceeded: use respiratory equipment with suitable filter (filter type A) or wear a self contained respiratory apparatus

Select materials and equipment for physical protection depending on the concentration and volume of hazardous substances and the workplace involved.

see section 6.

Reaction with strong oxidants. Vapours may form explosive mixture with air.

Keep away from heat and sources of ignition.

strong oxidizing agents

In case of fire or thermal decomposition production of, for example, Carbon monoxide, carbon dioxide (CO2)

waste incineration plant

dispose of to waste incineration plant