NextSDS Logo
Safety Data Sheet EN

STARKE REPLENISH SPRAY

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
STARKE REPLENISH SPRAY
Chemical Name
Non-aerosol
Synonyms
Starke Replenish SiO2 Spray

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Protectant

Manufacturers & Suppliers

S

Starke Yacht Surface Technologies

distributor

17000 Alico Commerce Ct., Suite 101, Fort Myers, FL 33912

+1 (800) 203-5315

Emergency Contacts

John Watkins

+1 (239) 851-6030

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2A
Acute Tox. Cat. 4

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed.
H319 Causes serious eye irritation.

Precautionary Statements

P270 Do not eat, drink or smoke when using this product.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 Dispose of contents/container to licensed waste management facility (TSDF).
Wash thoroughly after handling. Do not touch eyes.
If skin irritation or rash occurs: Get medical help.
If eye irritation persists: Get medical help.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
SILICONE MICROEMULSION --- 95 - 100% Yes
PROPRIETARY --- 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air at once.

Symptoms: None expected.

Skin contact

If irritation occurs and product is on the skin, rinse thoroughly with lukewarm water, followed by a thorough washing of the affected area with soap and water. If irritation, redness or swelling persists, contact a physician immediately.

Symptoms: May be irritating to skin. The product can cause allergic skin reactions (e.g., rashes, welts, dermatitis) in some sensitive individuals. Symptoms of skin overexposure may include redness, itching, and irritation of affected areas.

Eye contact

Splashes are not likely; however, if product gets in the eyes, flush with copious amounts of lukewarm water for at least 15 minutes. If irritation occurs, contact a physician.

Symptoms: Moderately irritating to the eyes. Symptoms of overexposure may include redness, itching, irritation and watering.

Ingestion

If ingested, do not induce vomiting. If product has been swallowed, drink plenty of water or milk IMMEDIATELY. If the patient is vomiting, continue to offer water or milk. Never give water or milk to an unconscious person. Contact the nearest Poison Control Center or local emergency number. Provide an estimate of the time at which the material was ingested and the amount of the substance that was swallowed.

Symptoms: Nausea, intestinal discomfort, vomiting and/or diarrhea.

Immediate Medical Attention

Contact the nearest Poison Control Center or local emergency number. If irritation occurs (eyes), contact a physician. If irritation, redness or swelling persists (skin), contact a physician immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide appropriate local exhaust ventilation on open containers. When using always keep the product moist. Use in an enclosed process area is recommended. Use in a well-ventilated area. Do not use in a confined area or areas with little or no air movement.

Hands

AVOID SKIN CONTACT . Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Nitrile Rubber. If necessary, refer to U.S. OSHA 29 CFR 1910.138, the appropriate standards of Canada, of the E.C. member states.

Eyes

AVOID EYE CONTACT . Wear safety glasses. If necessary, refer to U.S. OSHA 29 CFR 1910.133, Canadian standards, or the European Standard EN166.

Respiratory

Avoid breathing of vapors, mists, or spray. No special respiratory protection is required under typical circumstances of use or handling. If necessary, use only respiratory protection authorized per U.S. OSHA's requirement in 29 CFR 1910.134, or applicable U.S. state regulations, or the appropriate standards of Canada, its provinces, E.C. member states, or Australia.

Skin/Body

No special body protection is required under typical circumstances of use and handling. If necessary, refer to appropriate standards of Canada, the E.C. member states, or U.S. OSHA.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Odor Threshold
---
Melting Point
---
Solubility
Complete
Solidification Point
---
Flammability
---
Flash Point
ND
Boiling Point
100C (212 F)
Cloud Point
---
Relative Evaporation Rate
---
Upper Explosive Limit
---
Form
liquid
Solubility In Fat
---
Metal Corrosion
---
Freezing Point
---
Vapor Pressure
31.69 hPa @ 25C
Lower Explosive Limit
---
Physical State Data
liquid
Colour
Yellow
Evaporation Rate
---
Solubility In Water
---
Relative Density
1.0 0.05 g/cm [3]
Dynamic Viscosity
---
Odor
Fruity cherry like
Softening Point
---
Crystallisation Point
---
Properties Status
---
State Under Standard Conditions
---
Decomposition Temperature
---
Colour Intensity
---
Density
---
Auto Ignition Temperature
---
Partition Coefficient
---
Kinematic Viscosity
---
Voc Content
---
Molecular Weight
---
Vapor Density
---
Physical State
liquid
Explosive Limits
---
Ph
6.0 1
Bulk Density
---
Appearance
Yellow liquid
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is STARKE REPLENISH SPRAY known by?

STARKE REPLENISH SPRAY is also known as: Starke Replenish SiO2 Spray

What is the hazard signal word for STARKE REPLENISH SPRAY?

The signal word is warning.

What is the physical form of STARKE REPLENISH SPRAY?

STARKE REPLENISH SPRAY is a liquid appearing as yellow liquid with yellow color. It has fruity cherry like odor.

What is the solubility of STARKE REPLENISH SPRAY?

Complete

What is STARKE REPLENISH SPRAY used for?

Protectant

What are the hazard statements for STARKE REPLENISH SPRAY?

This substance has 2 hazard statements:

  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.