Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Di-Potassium Hydrogen Orthophosphate Ph.Eur.
- Product Code
- 26932
Regulatory Identifiers
- CAS Number
- 7758-11-4 Check regulations →
- REACH No.
- 01-2119493919-15-XXXX
Identified Uses
General chemical reagent
Uses advised against
no data available
Manufacturers & Suppliers
VWR International Ltd.
national supplier
Hunter Boulevard, Magna Park, Lutterworth, LE17 4XN
0800 22 33 44
Emergency Contacts
CareChem24
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| di-Potassium hydrogen orthophosphate | 7758-11-4 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest. If breathing is irregular or stopped, administer artificial respiration. In case of respiratory tract irritation, consult a physician.
After contact with skin, wash immediately with plenty of water and soap. Remove contaminated, saturated clothing immediately. In case of skin reactions, consult a physician.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye. Remove contact lenses, if present and easy to do. Continue rinsing.
If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do NOT induce vomiting. Give nothing to eat or drink.
Immediate Medical Attention
obtain immediate medical attention
Medical Treatment
no data available
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product itself does not burn. Co-ordinate fire-fighting measures to the fire surroundings.
no restriction
In case of fire may be liberated: Phosphorus oxides
DO NOT fight fire when fire reaches explosives. Use water spray jet to protect personnel and to cool endangered containers. In case of fire: Evacuate area.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Clear spills immediately.
Spilled product must never be returned to the original container for recycling. Clean contaminated articles and floor according to the environmental legislation.
Related Products
Similar products with comparable safety profiles
Potassium dihydrogen phosphate
CAS: 7778-77-0
Potassium hydroxide, pellets Ph. Eur.
CAS: 1310-58-3
Potassium dihydrogen phosphate cryst. EMPROVE® EXPERT Ph Eur, BP, JPC, NF
CAS: 7778-77-0
Disodium hydrogen phosphate
CAS: 7558-79-4
Potassium pyrophosphate
CAS: 7320-34-5
Potassium phosphate dibasic
CAS: 7758-11-4
Potassium chloride Ph.Eur./USP
CAS: 7447-40-7
Potassium hydrogen phthalate
CAS: 877-24-7
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid: Inhalation, Avoid contact with eyes and skin.
Recommended storage temperature: 15-25°C. Keep container tightly closed and in a well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technical measures and the application of suitable work processes have priority over personal protection equipment. If handled uncovered, arrangements with local exhaust ventilation have to be used.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Recommended glove articles DIN-/EN-Norms: EN ISO 374. In the case of wanting to use the gloves again, clean them before taking off and air them well. By short-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,12 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-0998. By long-term hand contact: Suitable material: NBR (Nitrile rubber), Thickness of the glove material: 0,38 mm, Breakthrough time (maximum wearing time): > 480 min, Recommended glove articles: VWR 112-3717 / 112-1381
Eye glasses with side protection DIN-/EN-Norms: DIN EN 166. Recommendation: VWR 111-0432
Usually no personal respirative protection necessary.
Wear suitable protective clothing. When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
no data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
no data available
no data available
no data available
no data available
no data available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.
Dispose according to local legislation. Consult the appropriate local waste disposal expert about waste disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Di-Potassium Hydrogen Orthophosphate Ph.Eur.?
The signal word is no signal word.
What is the physical form of Di-Potassium Hydrogen Orthophosphate Ph.Eur.?
Di-Potassium Hydrogen Orthophosphate Ph.Eur. is a solid appearing as solid, white with white color. It has no data available odor.
What is Di-Potassium Hydrogen Orthophosphate Ph.Eur. used for?
General chemical reagent
What is the melting point of Di-Potassium Hydrogen Orthophosphate Ph.Eur.?
The melting point is 340 °C and the boiling point is no data available.