Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aquilim 315 MV water-based dispersion
- Product Code
- 450
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesives, sealants
Manufacturers & Suppliers
Renia Gesellschaft mbH
Ostmerheimer Straße 516, 51109 Köln, Deutschland
+492216307990
http://www.renia.com
Emergency Contacts
Grimme
+49-221-630799-17
Only available during office hours.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
aqueous polychloroprene dispersion
Full text of H- and EUH-statements: see section 16.
Notes
Full text of H- and EUH-statements: see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. If breathing is irregular or stopped, administer artificial respiration. Medical treatment necessary. In case of inhalation of decomposition products, affected person should be moved into fresh air and kept still.
Take off contaminated clothing and wash it before reuse. After contact with skin, wash immediately with plenty of water and soap.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
Rinse mouth immediately and drink plenty of water. Do NOT induce vomiting. In case of allergic symptoms, especially in the breathing area, seek medical advice immediately.
Immediate Medical Attention
Medical treatment necessary. In case of allergic symptoms, especially in the breathing area, seek medical advice immediately.
Medical Treatment
Treat symptomatically. Transport affected person in lying position, in case of shortness of breath in half-sitting position. Where appropriate artificial ventilation.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), alcohol resistant foam, Extinguishing powder, ABC-powder, spray mist, (water), Dry sand.
Full water jet. Strong water jet.
Do not inhale explosion and combustion gases.
Remove product from area of fire.
Firefighter Protection
In case of fire: Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with eyes and skin. Use personal protection equipment.
Do not allow to enter into surface water or drains. Cover drains.
Absorb with liquid-binding material
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only outdoors or in a well-ventilated area.
Keep container tightly closed and in a well-ventilated place. Store in a well-ventilated and dry room at temperatures between 10 °C and 30 °C. not useable after freezing.
When using do not eat, drink, smoke, sniff. Draw up and observe skin protection programme. Wash hands and face before breaks and after work and take a shower if necessary.
No special fire protection measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special measures are necessary.
Suitable material: NBR (Nitrile rubber); Thickness of the glove material: >= 0,4 mm; Breakthrough time (maximum wearing time): >= 480 min. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Wear closely fitting protective glasses in case of splashes.
If technical exhaust or ventilation measures are not possible or insufficient, respiratory protection must be worn. Combination filtering device (EN 14387). Use the following filter types for cleaning waste gases:
When handling with chemical substances, protective clothing with CE-labels including the four control digits must be worn.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. In case of gas escape or of entry into waterways, soil or drains, inform the responsible authorities.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under storage at normal ambient temperatures.
No hazardous reaction when handled and stored according to provisions.
No known hazardous reactions.
Frost
Acid, concentrated, Alkali (lye), concentrated, Solvent.
Does not decompose when used for intended uses.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not empty into drains; dispose of this material and its container in a safe way. Waste disposal according to directive 2008/98/EC, covering waste and dangerous waste.
Do not empty into drains; dispose of this material and its container in a safe way.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- not applicable
- Transport Class
- not applicable
- Packing Group
- not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aquilim 315 MV water-based dispersion?
The signal word is no signal word.
What is the physical form of Aquilim 315 MV water-based dispersion?
Aquilim 315 MV water-based dispersion is a liquid with whitish color. It has characteristic odor.
What is Aquilim 315 MV water-based dispersion used for?
Adhesives, sealants
What is the melting point of Aquilim 315 MV water-based dispersion?
The melting point is 4 °C and the boiling point is 100 °C.