Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HYPAM FIXER 1+4
- Product Code
- 10137
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Photographic Fixer Solution
Manufacturers & Suppliers
HARMAN technology Ltd.
manufacturer
+44(0)1565 650000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Unlikely route of exposure as the product does not contain volatile substances.
Symptoms: No specific symptoms noted.
Rinse immediately with plenty of water.
Symptoms: May cause skin irritation.
Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Get medical attention if any discomfort continues.
Symptoms: May cause temporary eye irritation.
Rinse mouth thoroughly.
Symptoms: No specific symptoms noted.
Immediate Medical Attention
Get medical attention if any discomfort continues.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire-extinguishing media appropriate for surrounding materials.
No unusual fire or explosion hazards noted.
No specific fire fighting procedure given.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent discharge of larger quantity to drain.
Avoid discharge into drains.
Flush with plenty of water to clean spillage area.
Materials: water
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid spilling, skin and eye contact. Provide good ventilation.
Keep out of reach of children.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Must not be handled in confined space without sufficient ventilation.
Use protective gloves.
Use eye protection.
Wear suitable protective clothing as protection against splashing or contamination.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions.
No specific reactivity hazards associated with this product.
Will not polymerise.
Avoid contact with acids.
Avoid contact with other photographic solutions and/or cleaning compounds.
Irritating gases/vapours/fumes of: Sulphur dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Used, diluted, and spent solutions may be allowed to be discharged to sanitary sewer by permit IF allowed by local regulations. Waste may have to be pre-treated before discharge. Waste that cannot be discharged to sewer may have to be handled by a licensed hazardous waste contractor.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable.
- Shipping Name
- Not applicable.
- Transport Class
- Not classified for transportation.
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HYPAM FIXER 1+4?
The signal word is no signal word.
What is the physical form of HYPAM FIXER 1+4?
HYPAM FIXER 1+4 is a liquid appearing as liquid water-soluble. with colourless to pale yellow. color. It has slight odour. odor.
What is the solubility of HYPAM FIXER 1+4?
Soluble in water.
What is HYPAM FIXER 1+4 used for?
Photographic Fixer Solution
What is the melting point of HYPAM FIXER 1+4?
The melting point is <0 °C and the boiling point is >100 °C.