Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- A1 Retarder
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
no further relevant information available
Manufacturers & Suppliers
A.C.T.
Nijverheidsweg 15 A, 3251 LP Stellendam, The Netherlands
++31-187-663006
Emergency Contacts
Emergency Contact
+31 (0)187 663006
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
This product does not contain, in concentrations equal to or greater than those laid down by the Regulation (EC) No. 2015/830, any substances presenting a health or environmental hazard nor any substances for which there are Community workplace exposure limits in place.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move subject to fresh air. If necessary, provide artificial respiration. Keep patient warm.
Immediately wash with soap and water and rinse thoroughly.
Rinse opened eye with plenty of water for several minutes.
Do not induce vomiting.
Immediate Medical Attention
If symptoms persist, consult a doctor. Call for medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water haze, water spray, fire-extinguishing powder, foam.
no data available.
No further relevant information available.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep spills and cleaning runoff out of municipal; sewers and open bodies.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Keep ignition sources away – do not smoke – protect from heat.
Store in well ventilated area.
Keep ignition sources away – do not smoke – protect from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Tightly fitting safety glasses with side-shields
Filter P2
Use protective suit
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
not determined
Reacts with peroxides, oxidising agents and alkali (lyes)
no data available
No further information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity:
No further relevant information available regarding aquatic toxicity.
12.2. Persistence and degradability: Other information.
The product is easily biodegradable.
12.3. Bio accumulative potential:
No further relevant information available.
12.4. Mobility in soil:
12.5. Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
12.6. Other adverse effects:
No further relevant information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must be specially treated adhering to official regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not regulated (non-hazardous) for Transport
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labelling according to Regulation (EC) No 1272/2008 GHS label elements
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for A1 Retarder?
The signal word is no signal word.
What is A1 Retarder used for?
no further relevant information available
What is the melting point of A1 Retarder?
The melting point is 0 °C water and the boiling point is 100 °C water.