NextSDS Logo
Safety Data Sheet EN

Mixture 80 PPM C3H8 in N2

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Mixture 80 PPM C3H8 in N2

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial and professional use. Perform risk assessment prior to use.

Uses advised against

Not for consumer use.

Manufacturers & Suppliers

A

Air Products Plc

2 Millennium Gate, Westmere Drive, Crewe, Cheshire

+44(0)3457 020202

Emergency Contacts

Emergency Contact

+44(0)8085 020202

NHS Direct in England or Wales

0845 46 47

NHS 24 in Scotland

08454 24 24 24

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Gases under pressure - Compressed gas H280

GHS Pictograms

GHS04 - Compressed gas

GHS04

Hazard Statements

H280 Contains gas under pressure; may explode if heated.

Precautionary Statements

P403 Store in a well-ventilated place.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixture

Concentration is nominal. For the exact product composition, please refer to technical specifications.

Chemical Name CAS Number Concentration Hazardous
Propane EC: 200-827-9 74-98-6 80% Yes
Nitrogen EC: 231-783-9 7727-37-9 99.99% Yes

Notes

Refer to section 16 for full text of each relevant hazard statement (H).

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If breathing has stopped or is labored, give assisted respirations. Supplemental oxygen may be indicated. If the heart has stopped, trained personnel should begin cardiopulmonary resuscitation immediately. In case of shortness of breath, give oxygen.

Symptoms: Exposure to oxygen deficient atmosphere may cause the following symptoms: Dizziness. Salivation. Nausea. Vomiting. Loss of mobility/consciousness.

Skin contact

Adverse effects not expected from this product.

Eye contact

In case of direct contact with eyes, seek medical advice.

Ingestion

Ingestion is not considered a potential route of exposure.

Immediate Medical Attention

If exposed or concerned: Get medical attention/advice.

Medical Treatment

If exposed or concerned: Get medical attention/advice.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide natural or mechanical ventilation to prevent oxygen deficient atmospheres below 19.5% oxygen.

Hands

Wear work gloves when handling gas containers. Standard EN 388 - Protective gloves against mechanical risk.

Eyes

Safety glasses recommended when handling cylinders. Standard EN 166 - Personal eye-protection.

Respiratory

Self contained breathing apparatus (SCBA) or positive pressure airline with mask are to be used in oxygen-deficient atmosphere. Air purifying respirators will not provide protection. Users of breathing apparatus must be trained.

Skin/Body

Safety shoes are recommended when handling cylinders. Standard EN ISO 20345 - Personal protective equipment - Safety footwear.

Environmental

If applicable, refer to the extended section of the SDS for further information on CSA.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Compressed gas.
Physical State Data
gas
State Under Standard Conditions
---
Appearance
---
Colour
Colorless gas
Colour Intensity
---
Form
---
Odor
Not determined. : Mixture contains one or more component(s) which have the following odor: No odor warning properties. Sweet.
Odor Threshold
Odour threshold is subjective and inadequate to warn of overexposure.
Ph
Not applicable for gases and gas mixtures.
Melting Point
No data available.
Boiling Point
- 234 F (-148 )
Flash Point
Not applicable for gases and gas mixtures.
Freezing Point
No data available.
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable for gases and gas mixtures.
Vapor Pressure
No data available.
Vapor Density
---
Relative Density
1.5574 (water = 1)
Bulk Density
---
Density
0.0012 g/cm3 (0.075 lb/ft3)Note: (as vapor)
Flammability
Non flammable.
Upper Explosive Limit
Non flammable.
Lower Explosive Limit
Non flammable.
Explosive Limits
---
Auto Ignition Temperature
Non flammable.
Decomposition Temperature
Not applicable.
Solubility
---
Partition Coefficient
Not known.
Solubility In Water
Not known, but considered to have low solubility.
Solubility In Fat
---
Molecular Weight
28.03 g/mol
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1956
Shipping Name
COMPRESSED GAS, N.O.S., (Nitrogen, Propane)
Transport Class
2.2
Packing Group
Not applicable.
ADR

Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency.

IMDG

Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency.

IATA

Transport allowed (Passenger and Cargo Aircraft). Transport allowed (Cargo Aircraft only). Avoid transport on vehicles where the load space is not separated from the driver's compartment. Ensure vehicle driver is aware of the potential hazards of the load and knows what to do in the event of an accident or an emergency.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Mixture 80 PPM C3H8 in N2?

The signal word is warning.

What is the physical form of Mixture 80 PPM C3H8 in N2?

Mixture 80 PPM C3H8 in N2 is a compressed gas. with colorless gas color. It has not determined. : mixture contains one or more component(s) which have the following odor: no odor warning properties. sweet. odor.

What is Mixture 80 PPM C3H8 in N2 used for?

Industrial and professional use. Perform risk assessment prior to use.

What are the hazard statements for Mixture 80 PPM C3H8 in N2?

This substance has 1 hazard statement:

  • H280: Contains gas under pressure; may explode if heated.

What is the melting point of Mixture 80 PPM C3H8 in N2?

The melting point is No data available. and the boiling point is - 234 F (-148 ).