Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Craftmaster Engine Enamel
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Surface Coating, Synthetic Topcoat
Manufacturers & Suppliers
HMG PAINTS LIMITED
manufacturer
Riverside Works, Collyhurst Road, Collyhurst, Manchester, M40 7RU, UNITED KINGDOM
Emergency Contacts
Emergency Contact
+44 (0)161 205 7631
business hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C9-12, n-alkanes, isoalkanes,cyclics, aromatics EC: 919-446-0 | --- | 25 - 50% | Yes |
| Hydrocarbons, C9 - C11, n-alkanes, isoalkanes, cyclics, <2% aromatics EC: 919-857-5 | --- | 10 - 25% | Yes |
| Solvent naphtha (petroleum), light aromatic EC: 918-668-5 | --- | 2.5 - 10% | Yes |
| 4-isopropenyl-1-methylcyclohexane EC: 205-341-0 | 138-86-3 | 1 - 2.5% | Yes |
| Xylene (mix) EC: 215-535-7 | 1330-20-7 | 1 - 2.5% | Yes |
| cobalt bis(2-ethylhexanoate) EC: 205-250-6 | 136-52-7 | 1% | Yes |
| 2-ethylhexanoic acid, zirconium salt EC: 245-018-1 | 22464-99-9 | 1% | Yes |
| phthalic anhydride EC: 201-607-5 | 85-44-9 | 1% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air and call for a doctor. In case of unconsciousness place patient stably in side position for transportation. Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. Remove contaminated clothing. Immediately rinse with water.
Rinse opened eye for several minutes under running water.
Do not induce vomiting; call for medical help immediately and show safety datasheet or label.
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
ACE® Premium Enamel Paint + Primer Machinery Gray
---
DUPLI-COLOR™ Engine Enamel with Ceramic, Ford Semi-Gloss Black
---
ACE® Premium Enamel Paint + Primer Chrome Aluminum Gloss
---
Simoniz VHT Black Paint/Enamel
---
Industrial WORK DAY™ Enamel Spray Paint Flat Black
---
5500 High Build Epoxy
UFI: 0XE0-40CC-100J-0KG9
PRO INDUSTRIAL™ Industrial Enamel Alkyd Gloss Black
---
PRO INDUSTRIAL™ Industrial Enamel Alkyd Gloss Ultradeep Base
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
When skin exposure may occur, advice should be sought from the glove supplier on appropriate types and usage times for this product. Protective gloves
Tightly sealed goggles
When spraying the product, use a respiratory protective device.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1263
- Shipping Name
- PAINT RELATED MATERIAL
- Transport Class
- 3 Flammable liquids.
- Packing Group
- III
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Craftmaster Engine Enamel?
The signal word is danger.
What is the physical form of Craftmaster Engine Enamel?
Craftmaster Engine Enamel is a liquid with according to product specification color. It has characteristic odor.
What is Craftmaster Engine Enamel used for?
Surface Coating, Synthetic Topcoat
What are the hazard statements for Craftmaster Engine Enamel?
This substance has 5 hazard statements:
- H226: Flammable liquid and vapour.
- H317: May cause an allergic skin reaction.
- H336: May cause drowsiness or dizziness.
- H372: Causes damage to organs through prolonged or repeated exposure.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Craftmaster Engine Enamel?
The melting point is Undetermined. and the boiling point is 139.