Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Jangro - HARD SURFACE CLEANER
- Product Code
- A018 JA
- Synonyms
- Internal identification: BA001-5
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 7GN6-0X5D-R209-8WRN
Identified Uses
Alkaline Liquid Hard Surface Cleaner.
Manufacturers & Suppliers
Jangro Limited
Jangro House, Worsley Road, Farnworth, Bolton, BL4 9LU, UK
01204 795 955
Jangro (Europe) Limited
6-9 Trinity Street, Dublin 2, D02 EY47, Ireland
01 617 7911
Emergency Contacts
Emergency Contact
01772 318 818
Mon to Thu 8.30am to 4.45pm - Fri 8.30am to 1.30pm
National Poisons Information Centre, Beaumont Hospital, Dublin
01-8092166
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ALCOHOL (C9-C11) ETHOXYLATE (6EO) | 68439-46-3 | 1 - 3% | Yes |
| COCAMIDOPROPYL BETAINE EC: 931-296-8 | 61789-40-0 | 1 - 3% | Yes |
| 2-AMINOETHANOL EC: 205-483-3 | 141-43-5 | 1 - 3% | Yes |
| AMINO TRIMETHYLENE PHOSPHONIC ACID PENTA SODIUM SALT | 2235-43-0 | 0.1 - 1% | Yes |
The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing.
Symptoms: Irritation of nose, throat and airway.
Wash with plenty of water. Get medical attention if irritation persists after washing.
Symptoms: Causes skin irritation. Prolonged and frequent contact may cause redness and irritation.
Rinse immediately with plenty of water. Remove any contact lenses and open eyelids wide apart. Continue to rinse. Get medical attention immediately.
Symptoms: Severe irritation, burning and tearing. Prolonged contact causes serious eye and tissue damage.
Do not induce vomiting. Give plenty of water to drink. Get medical attention if any discomfort continues.
Symptoms: May cause discomfort if swallowed.
Immediate Medical Attention
Get medical attention immediately (for eye contact), get medical attention if irritation persists after washing (for skin), get medical attention if any discomfort continues (for ingestion).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product is not flammable. Use fire-extinguishing media suitable for the surrounding fire.
Thermal decomposition or combustion products may include the following substances: Irritating gases or vapours.
Firefighter Protection
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Flush away spillage with plenty of water.
Contain and absorb spillage with sand, earth or other non-combustible material. Collect and place in suitable waste disposal containers and seal securely.
Spillages or uncontrolled discharges into watercourses must be reported immediately to the Environmental Agency or other appropriate regulatory body.
Flush away spillage with plenty of water (small); Contain and absorb spillage with sand, earth or other non-combustible material. Collect and place in suitable waste disposal containers and seal securely (large).
Materials: sand, earth or other non-combustible material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear protective clothing, gloves, eye and face protection.
Keep only in the original container in a cool, well-ventilated place.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not relevant.
Wear protective gloves. (Household rubber gloves.)
Wear eye protection.
Respiratory protection not required.
Wear appropriate clothing to prevent any possibility of skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No particular stability concerns.
There are no known reactivity hazards associated with this product.
See sections 10.1, 10.4 & 10.5
There are no known conditions that are likely to result in a hazardous situation.
No specific material or group of materials is likely to react with the product to produce a hazardous situation.
No known hazardous decomposition products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Discharge used solutions to drain. Small amounts (less than 5 Litres) of unwanted product may be flushed with water to sewer. Larger volumes must be sent for disposal by approved waste contractor.
Small amounts (less than 5 Litres) of unwanted product may be flushed with water to sewer. Larger volumes must be sent for disposal by approved waste contractor.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable.
- Shipping Name
- Not applicable.
- Transport Class
- Not regulated.
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety Data Sheet prepared in accordance with EU Regulation: REACH Commission Regulation (EU) No 2015/830 and UK Regulation: SI 2020 No. 1577. Product classified under EU GHS: CLP and UK GHS.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Jangro - HARD SURFACE CLEANER known by?
Jangro - HARD SURFACE CLEANER is also known as: Internal identification: BA001-5
What is the hazard signal word for Jangro - HARD SURFACE CLEANER?
The signal word is danger.
What is the physical form of Jangro - HARD SURFACE CLEANER?
Jangro - HARD SURFACE CLEANER is a liquid. appearing as liquid. with clear. blue. color. It has ocean odor.
What is the solubility of Jangro - HARD SURFACE CLEANER?
Soluble in water.
What is Jangro - HARD SURFACE CLEANER used for?
Alkaline Liquid Hard Surface Cleaner.
What are the hazard statements for Jangro - HARD SURFACE CLEANER?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
What is the melting point of Jangro - HARD SURFACE CLEANER?
The melting point is -1°C and the boiling point is 100°C @ 760 mm Hg.