Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE 2701
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Anaerobic Adhesive
Manufacturers & Suppliers
Henkel Limited
undefined
Apollo Court, 2 Bishop Square Business Park AL10 9EY Hatfield Great Britain
+44 (1707) 635000
Emergency Contacts
Emergency Contact
+44 (0)1442 278497
24 Hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Anaerobic adhesive
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| , -dimethylbenzyl hydroperoxide EC: 201-254-7 | 80-15-9 | 1 - 2.5% | Yes |
| 2-hydroxyethylmethacrylaat (Noot D) EC: 212-782-2 | 868-77-9 | 0.1 - 1% | Yes |
| isopropylbenzene (cumene) EC: 202-704-5 | 98-82-8 | 2.5% | Yes |
| methacrylic acid, monoester with propane-1,2-diol EC: 248-666-3 | 27813-02-1 | 25 - 50% | Yes |
| Methacryloxyethyl succinaat. EC: 244-096-4 | 20882-04-6 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Symptoms: Irritation, coughing, shortness of breath, chest tightness.
Rinse with running water and soap. Seek medical advice.
Symptoms: Rash, Urticaria.
Rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary.
Symptoms: Irritation, conjunctivitis.
Rinse out mouth, drink 1-2 glasses of water, do not induce vomiting. Seek medical advice.
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in well-ventilated areas.
Avoid skin-contact. Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.
Wear protective glasses.
An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area Filter type: A
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE 2701?
The signal word is na: r-phrases.
What is the solubility of LOCTITE 2701?
Partially soluble (Solvent: Water); Miscible (Solvent: Acetone); emulsifiable (Solvent: Water)
What is LOCTITE 2701 used for?
Anaerobic Adhesive