NextSDS Logo
Safety Data Sheet EN

LOCTITE 577

How compliant is your chemical safety?

Free 2-minute compliance assessment

Check Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE 577

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Anaerobic Sealant

Manufacturers & Suppliers

Henkel Ltd Adhesives logo

Henkel Ltd Adhesives

undefined

Wood Lane End HP24RQ Hemel Hempstead Great Britain

+44 (1442) 278000

www.henkel-adhesives.com

Emergency Contacts

Emergency Contact

+44 (0)1442 278497

24 Hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Sens. Cat. 1 H317

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H317 May cause an allergic skin reaction.

Precautionary Statements

P280 Wear protective gloves.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixture
Chemical Name CAS Number Concentration Hazardous
1-decanol EC: 203-956-9 112-30-1 5 - 10% Yes
, -dimethylbenzyl hydroperoxide EC: 201-254-7 80-15-9 0.1 - 1% Yes
1-Actyl-2-phnylhydrazine EC: 204-055-3 114-83-0 0.1 - 1% Yes
Acide malique EC: 203-742-5 110-16-7 0.1 - 1% Yes
1,4-Naphtoquinone EC: 204-977-6 130-15-4 0.01 - 0.015% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If symptoms persist, seek medical advice.

Skin contact

Rinse with running water and soap. Obtain medical attention if irritation persists.

Symptoms: Rash, Urticaria.

Eye contact

Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.

Symptoms: Prolonged or repeated contact may cause eye irritation.

Ingestion

Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.

Immediate Medical Attention

Seek medical advice if inhalation symptoms persist or if skin irritation persists. Seek medical attention from a specialist for eye contact. Consult a doctor for ingestion.

Related Substances

Similar chemicals with comparable safety profiles

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation/extraction.

Hands

Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances. Please note that in practice the working life of chemical-resistant protective gloves may be considerably shorter than the permeation time determined in accordance with EN 374 as a result of the many influencing factors (e.g. temperature). If signs of wear and tear are noticed then the gloves should be replaced.

Eyes

Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing. Protective eye equipment should conform to EN166.

Respiratory

Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area Filter type: A (EN 14387)

Skin/Body

Wear suitable protective clothing. Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
---
Colour Intensity
---
Form
orange
Odor
mild
Odor Threshold
---
Ph
Not applicable, Product reacts with water.
Melting Point
---
Boiling Point
> 150 (> 302 F)None
Flash Point
> 93,3 (> 199.94 F); Pensky Martens closed cup
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
6,6700000 mbar (27,0 (80.6 F)); < 300 mbar;no method (50 (122 F))
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
1,15 g/cm3 None
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
Slight
Partition Coefficient
---
Solubility In Water
Slight
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE 577?

The signal word is warning.

What is the physical form of LOCTITE 577?

LOCTITE 577 is a liquid . It has mild odor.

What is the solubility of LOCTITE 577?

Slight

What is LOCTITE 577 used for?

Anaerobic Sealant

What are the hazard statements for LOCTITE 577?

This substance has 1 hazard statement:

  • H317: May cause an allergic skin reaction.

Compliance Scan

Free compliance check