Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP $ ^{®} $ MATT BLACK 500 ML
- Product Code
- 04006
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sector of Use: SU21 Consumer uses: Private households / general public / consumers, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen). Product category: Paint remover. Process category: PROC7 Industrial spraying, PROC11 Non industrial spraying. Application of the substance / the mixture: Spray varnish.
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
European Aerosols B.V.
manufacturer
Wolfraamweg 2 NL-8471 XC Wolvega The Netherlands
+31 (0)561 694400
Emergency Contacts
Emergency Contact
+31 (0)561-694400
09:00h - 17:00h
NPIS National Poisons Information Centre
+44 0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 5 - 10% | Yes |
| acetone EC: 200-662-2 | 67-64-1 | 25 - 50% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 10 - 12.5% | Yes |
| n-butyl acetate EC: 204-658-1 | 123-86-4 | 10 - 12.5% | Yes |
| butane(containing < 0,1 % butadiene(203-450-8)) EC: 203-448-7 | 106-97-8 | 5 - 10% | Yes |
| isobutane(containing < 0,1 % butadiene(203-450-8)) EC: 200-857-2 | 75-28-5 | 5 - 10% | Yes |
| titanium dioxide EC: 236-675-5 | 13463-67-7 | 2.5 - 5% | Yes |
| butan-1-ol EC: 200-751-6 | 71-36-3 | 2.5% | Yes |
| cellulose nitrate | 9004-70-0 | 2.5% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Immediate Medical Attention
Call for a doctor immediately.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
During heating or in case of fire poisonous gases are produced.
Firefighter Protection
Mouth respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Dispose contaminated material as waste according to item 13.
Related Substances
Similar chemicals with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Keep respiratory protective device available.
Observe official regulations on storing packagings with pressurised containers. Keep container tightly sealed.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Protective gloves Material of gloves Butyl rubber, BR The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min Butyl acetate: 60 min Ethyl acetate: 170 min Xylene: 42 min Butyl rubber gloves with a thickness of 0.4 mm are solvent resistant for 42- 480 minutes. As protective measure, we recommend that users and responsible persons for work safety assume solvent resistance length of 42 minutes. Considering the data in section 3 of this SDS, one can assume longer resistance length in particular cases.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Filter A2/P3
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known.
No dangerous decomposition products known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- not regulated
Warning: Gases.
Warning: Gases.
Warning: Gases.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP $ ^{®} $ MATT BLACK 500 ML?
The signal word is danger.
What is the physical form of MOTIP $ ^{®} $ MATT BLACK 500 ML?
MOTIP $ ^{®} $ MATT BLACK 500 ML is a aerosol appearing as aerosol with black color. It has solvent-like odor.
What is the solubility of MOTIP $ ^{®} $ MATT BLACK 500 ML?
Not miscible or difficult to mix.
What is MOTIP $ ^{®} $ MATT BLACK 500 ML used for?
Sector of Use: SU21 Consumer uses: Private households / general public / consumers, SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen). Product category: Paint remover. Process category: PROC7 Industrial spraying, PROC11 Non industrial spraying. Application of the substance / the mixture: Spray varnish.
What are the hazard statements for MOTIP $ ^{®} $ MATT BLACK 500 ML?
This substance has 3 hazard statements:
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- Extremely flammable aerosol. Pressurised container: May burst if heated.
What is the melting point of MOTIP $ ^{®} $ MATT BLACK 500 ML?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..