Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- E-POS 573
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy resin. Industrial use.
Manufacturers & Suppliers
QR Polymers B.V.
manufacturer
Smederijstraat 2, NL-4814 DB Breda
+31 76 531 79 21
Emergency Contacts
Emergency Contact
+31 76 531 79 21
8:30 - 17:00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2,2'[(1-METHYLETHYLIDENE)BIS(4,1-PHENYLENEOXYMETHYLENE)]BISOXIRANE EC: 216-823-5 | 1675-54-3 | 70 - 95% | Yes |
| 1,3-PROPANEDIOL, 2-ETHYL-2-(HYDROXYMETHYL)-, POLYMER WITH (CHLOROMETHYL)OXIRANE | 30499-70-8 | 10 - 20% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours.
Wash immediately with plenty of soap and water. Consult a doctor.
Bathe the eye with running water for 15 minutes. Consult a doctor.
Do not induce vomiting. Give 1 cup of water to drink every 10 minutes. Consult a doctor.
Immediate Medical Attention
Show this safety data sheet to the doctor in attendance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Water fog. Carbon dioxide. Dry chemical powder. Alcohol resistant foam.
In combustion emits toxic fumes.
Use water spray to cool containers.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Refer to section 8 of SDS for personal protection details. Remove all incompatible materials as outlined in section 10 of SDS.
Do not discharge into drains or rivers. Contain the spillage using bunding.
Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
Materials: dry earth or sand
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure there is sufficient ventilation of the area. Avoid direct contact with the substance.
Store in a cool, well ventilated area. Keep container tightly closed. Keep away from direct sunlight. Avoid incompatible materials and conditions - see section 10 of SDS.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure there is sufficient ventilation of the area.
Protective gloves. Breakthrough time of the glove material > 8 hours.
Safety glasses with side-shields.
Self-contained breathing apparatus must be available in case of emergency.
Protective clothing.
Refer to specific Member State legislation for requirements under Community environmental legislation. Prevent from entering in public sewers or the immediate environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under recommended transport or storage conditions.
Hazardous reactions will not occur under normal transport or storage conditions.
Direct sunlight. Heat.
Strong acids. Strong bases.
In combustion emits toxic fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transfer to a suitable container and arrange for collection by specialised disposal company.
Transfer to a suitable container and arrange for collection by specialised disposal company.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1760
- Shipping Name
- CORROSIVE LIQUID, N.O.S. (1,3-PROPANEDIOL, 2-ETHYL-2-(HYDROXYMETHYL)-, POLYMER WITH (CHLOROMETHYL)OXIRANE)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for E-POS 573?
The signal word is danger.
What is the physical form of E-POS 573?
E-POS 573 is a liquid with pale yellow color. It has characteristic odour odor.
What is E-POS 573 used for?
Epoxy resin. Industrial use.
What are the hazard statements for E-POS 573?
This substance has 4 hazard statements:
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H360F: May damage fertility.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of E-POS 573?
The melting point is No data available. and the boiling point is >200°C.