Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ZEP INSTANT HAND SANITIZER GEL 70% 500ML 12CT
- Product Form
- GEL
- Product Code
- 000000000000355801
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
This product is labeled as an over-the-counter (non-prescription) drug under the Food and Drug administration (FDA) regulations of the United States.
Manufacturers & Suppliers
Zep Inc.
manufacturer
350 Joe Frank Harris Parkway, SE Emerson, GA 30137
877-428-9937
Emergency Contacts
Emergency Contact
877-541-2016
CHEMTREC
800-424-9300
CHEMTREC
202-483-7616
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethanol | 64-17-5 | 50 - 70% | Yes |
Notes
The exact percentages of disclosed substances are withheld as trade secrets.
First Aid Measures
Emergency procedures for chemical exposure incidents
If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
This product is formulated for use on skin. Discontinue use if irritation and redness develop. In the workplace, if a significant exposure or spill occurs on the skin, immediately wash off with plenty of water.
Symptoms: irritation and redness
Remove contact lenses. Protect unharmed eye. If in eyes, rinse with water for 15 minutes. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms: Causes serious eye irritation.
Keep respiratory tract clear. DO NOT induce vomiting unless directed to do so by a physician or poison control center. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical, Water spray jet
High volume water jet
Do not allow run-off from fire fighting to enter drains or water courses.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Material can create slippery conditions. Use non-slip safety shoes in areas where spills or leaks can occur. Refer to protective measures listed in sections 7 and 8. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains, inform respective authorities.
Sweep up or vacuum up spillage and collect in suitable container for disposal.
Related Products
Similar products with comparable safety profiles
ZEP FOAMING WALL CLEANER 20N18_12CT
---
Invirtu Foam Hand Sanitiser
---
ZEP SPRAY MOP REFILL & FLOOR CLEANER_1GL_4CT
---
Tork Alcohol Gel Hand Sanitizer
---
ZEP CONCENTRATED GLASS CLEANER 5GL
---
ZEP FAST 505 DEGREASER & CLEANER_1GL_4CT
---
NILAQUA HAND SANITISER
---
STOKO® REFRESH SANITISER GEL (2-A)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of aerosol. Avoid contact with eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Take precautionary measures against static discharges. Dispose of rinse water in accordance with local and national regulations.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Observe label precautions.
Smoking, eating and drinking should be prohibited in the application area.
No smoking. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special ventilation requirements necessary during product use. In the workplace or during a spill, utilize effective exhaust ventilation.
This product is formulated for use on skin. No special protection is required.
Eye protection is not required while sanitizing with this product. In the workplace, the use of safety glasses is recommended to avoid eye exposure during the handling of containers or during spill clean-up.
No personal respiratory protective equipment normally required. In the workplace- If a significant exposure or spill occurs, use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines.
No special protection is required.
Dispose of rinse water in accordance with local and national regulations.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable
No decomposition if stored and applied as directed. Vapours may form explosive mixture with air.
Heat, flames and sparks.
Strong oxidizing agents
Carbon oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations.
Do not dispose of waste into sewer. Do not contaminate ponds, waterways or ditches with chemical or used container.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- Flammable liquids, n.o.s., (ETHANOL)
- Transport Class
- 3
- Packing Group
- III
Limited quantity
Limited quantity
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ZEP INSTANT HAND SANITIZER GEL 70% 500ML 12CT?
The signal word is warning.
What is the physical form of ZEP INSTANT HAND SANITIZER GEL 70% 500ML 12CT?
ZEP INSTANT HAND SANITIZER GEL 70% 500ML 12CT is a gel appearing as gel with colourless, clear color. It has citrus odor.
What is the solubility of ZEP INSTANT HAND SANITIZER GEL 70% 500ML 12CT?
Water solubility : soluble Solubility in other solvents : No data available
What is ZEP INSTANT HAND SANITIZER GEL 70% 500ML 12CT used for?
This product is labeled as an over-the-counter (non-prescription) drug under the Food and Drug administration (FDA) regulations of the United States.
What are the hazard statements for ZEP INSTANT HAND SANITIZER GEL 70% 500ML 12CT?
This substance has 2 hazard statements:
- H226: Flammable liquid and vapour.
- H319: Causes serious eye irritation.
What is the melting point of ZEP INSTANT HAND SANITIZER GEL 70% 500ML 12CT?
The melting point is No data available and the boiling point is 78 °C.