Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Flux 1
- Chemical Name
- Lead borosilicate
Regulatory Identifiers
- CAS Number
- 65997-18-4 Check regulations →
- EC Number
- 266-047-6 Check regulations →
Identified Uses
Enamel. For professional use only.
Uses advised against
All uses not specified in this section or in section 7.3
Manufacturers & Suppliers
CRISTALLERIE DE SAINT PAUL – EMAUX SOYER
manufacturer
LE PONT DE SAINT PAUL DE RIBES, 87 920 CONDAT SUR VIENNE - FRANCE
05 55 39 01 17
http://www.emaux-soyer.com
Emergency Contacts
Emergency Contact
+33 1 45 42 59 59
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture composed of inorganic substance
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Frits, chemicals (exempt) EC: 266-047-6 | 65997-18-4 | 100% | No |
To obtain more information on the risk of the substances consult sections 8, 11, 12 and 16.
Notes
- - Flux 1 - Contains Lead borosilicate ->
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of symptoms, move the person affected into fresh air.
In case of contact it is recommended to clean the affected area thoroughly with water and neutral soap.
Symptoms: modifications on the skin (stinging, redness, rashes, blisters,...)
Rinse with water until the product has been eliminated.
Symptoms: problems
In case of consumption in large quantities, it is recommended to seek medical assistance.
Immediate Medical Attention
In case of modifications on the skin (stinging, redness, rashes, blisters,...), seek medical advice with this Security Data Sheet. In case of problems (eye contact), consult a doctor with the MSDS of this product. In case of consumption in large quantities, it is recommended to seek medical assistance.
Medical Treatment
Non-applicable
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
any type of extinguishing agent can be used (ABC Powder, water,...)
Due to its non-flammable nature, the product does not present a fire risk under normal conditions of storage, manipulation and use.
Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other emergencies.
Firefighter Protection
Have available a minimum of emergency facilities or equipment (fire blankets, portable first aid kit,...) in accordance with Directive 89/654/EC.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Sweep up and shovel product or other means and place in container for reuse (preferred) or disposal See sections 8 and 13.
In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental spillage of both the product and its container.
Sweep up and shovel product or other means and place in container for reuse (preferred) or disposal
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Comply with the current legislation concerning the prevention of industrial risks with regards manually handling weights. Maintain order, cleanliness and destroy using safe methods (section 6).
Avoid sources of heat, radiation, static electricity and contact with food.
Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.
It is recommended to transfer at a slow speed to avoid the creation of electrostatic charges that could affect flammable products.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical protective gloves, CE CAT I, EN 374-1:2003, EN 374-3:2003/AC:2006, EN 420:2003+A1:2009. Replace the gloves at any sign of deterioration.
Panoramic glasses against liquid splash, CE CAT II, EN 166:2001, EN 172:1994/A1:2000, EN 172:1994/A2:2001, EN ISO 4007:2012. Clean daily and disinfect periodically according to the manufacturer’s instructions. Use if there is a risk of splashing.
Filter mask for particles, CE CAT III, EN 149:2001+A1:2009. Replace when an increase in resistance to breathing is observed.
Work clothing (CE CAT I, EN ISO 13688:2013, For professional use only); Anti-slip work shoes (CE CAT II, EN ISO 20347:2012, EN ISO 20344:2011).
This product does not contain substances dangerous to the environment, although it is recommended not to spill it. For additional information see sub section 7.1.D
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Chemically stable under the conditions of storage, handling and use.
No hazardous reactions are expected if the following technical instructions storage of chemicals. See section 7.
Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.
Shock and friction: Not applicable, Contact with air: Not applicable, Increase in temperature: Not applicable, Sunlight: Not applicable, Humidity: Not applicable
Not applicable
Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO2), carbon monoxide and other organic compounds.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity:
12.2 Persistence and degradability:
12.3 Bioaccumulative potential:
12.4 Mobility in soil:
12.5 Results of PBT and vPvB assessment:
12.6 Other adverse effects:
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult the authorized waste service manager on the assessment and disposal operations in accordance with Annex 1 and Annex 2 (Directive 2008/98/EC).
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
It is recommended to use the information included in this safety data sheet as data used in a risk evaluation of the local circumstances in order to establish the necessary risk prevention measures for the manipulation, use, storage and disposal of this product.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Flux 1?
The signal word is no signal word.
What is the physical form of Flux 1?
Flux 1 is a solid appearing as powdery with white color. It has odourless odor.
What is the solubility of Flux 1?
Non-applicable *
What is Flux 1 used for?
Enamel. For professional use only.
What is the melting point of Flux 1?
The melting point is 1028 °C and the boiling point is Non-applicable *.