Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Zinc 1000 µg/ml
- Product Code
- 6946
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For Laboratory, Research or Manufacturing use.
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Avantor Performance Materials B.V.
manufacturer
P.O.Box 1, 7400 AA Deventer, The Netherlands
(+31) (0)570 - 687500
Emergency Contacts
Environment Health & Safety department
(+31)(0) 570 687500
during normal opening times (8 am till 5.30 pm)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substances with harmless additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| water, distilled, conductivity or of similar purity | 7732-18-5 | --- | No |
| nitric acid | --- | 2.5% | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness bring patient into stable side position for transport.
Instantly wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.
Rinse out mouth and then drink plenty of water. Seek medical treatment.
Immediate Medical Attention
No further relevant information available.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed safety glasses.
In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure use breathing apparatus that is independent of circulating air.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1760
- Shipping Name
- CORROSIVE LIQUID, N.O.S. (NITRIC ACID)
- Transport Class
- 8 Corrosive substances.
- Packing Group
- III
Warning: Corrosive substances.
Warning: Corrosive substances.
Warning: Corrosive substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Zinc 1000 µg/ml?
The signal word is warning.
What is the physical form of Zinc 1000 µg/ml?
Zinc 1000 µg/ml is a solution appearing as form: solution, colour: colourless with colourless color. It has odourless odor.
What is the solubility of Zinc 1000 µg/ml?
not or partly miscible in Water
What is Zinc 1000 µg/ml used for?
For Laboratory, Research or Manufacturing use.
What are the hazard statements for Zinc 1000 µg/ml?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of Zinc 1000 µg/ml?
The melting point is 0 C and the boiling point is 100 C.