NextSDS Logo
Safety Data Sheet EN

Xpert vanA / Xpert vanA/vanB

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Xpert vanA / Xpert vanA/vanB
Product Code
GXVANA-10 / GXVANA/B-CE-10

Regulatory Identifiers

CAS Number
N/A

Identified Uses

as used in the laboratory

Manufacturers & Suppliers

C

Cepheid

manufacturer

904 Caribbean Drive, Sunnyvale, CA 94089, USA

(888) 838-3222

C

Cepheid AB

manufacturer

Röntgenvägen 5, SE-171 54 Solna, Sweden

+33.563.82.53.19

Emergency Contacts

CHEMTREC

(800) 424-9300

24-Hour

CHEMTREC

1 (703) 741-5500

24-Hour

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox.
Eye Irrit. Cat. 2A
Skin Irrit. Cat. 2

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.

Precautionary Statements

P264 Wash hands thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312 Call a POISON CENTER or physician if you feel unwell.
P501 Dispose of contents/container to location in accordance with local and regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Reagent #2 contains the following hazardous ingredient: Sodium hydroxide 0.5-2.0%.

Chemical Name CAS Number Concentration Hazardous
Sodium hydroxide EC: 215-185-5 1310-73-2 0.5 - 2% Yes

Notes

Reagent #1 and Sample Reagent, and beads each are at concentrations less than 1% in the mixture or not considered hazardous under US hazard communication regulations (29 CFR 1910.1200), EU directives for classification and labeling of substances or mixtures or the Global Harmonization System for classification and labeling of substances or mixtures.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

remove person to fresh air and consult a physician.

Symptoms: breathing difficulty

Skin contact

Wash with plenty of soap and water. Consult a physician.

Symptoms: Cause serious skin irritation.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Consult a physician.

Symptoms: Causes serious eye irritation.

Ingestion

Rinse mouth with water. Never give anything by mouth to an unconscious person. Consult a physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

None normally required.

Hands

wear gloves

Eyes

Wear safety glasses with side shields or chemical splash goggles. Base the choice of protection on the job activity and potential for contact with eyes or face.

Respiratory

None normally required.

Skin/Body

In laboratory setting, wear lab coat at a minimum to minimize skin contact. Base the choice of protection on the job activity and potential for skin contact.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Bulk Density
---
Solidification Point
---
Kinematic Viscosity
No information identified.
Partition Coefficient
N-octanol/water: No information identified.
Decomposition Temperature
No information identified.
State Under Standard Conditions
---
Vapor Density
No information identified.
Cloud Point
---
Properties Status
---
Solubility In Water
Reagents are already aqueous; beads are soluble in aqueous solutions.
Relative Evaporation Rate
---
Ph
Cartridge reagents: 8.1 - > 12.5.
Relative Density
No information identified.
Odor Threshold
No information identified.
Appearance
Beads are solid white components in cartridges; reagents are clear liquids which are primarily buffered in aqueous solutions.
Physical State
solid, liquid
Physical State Data
---
Auto Ignition Temperature
No information identified.
Colour Intensity
---
Form
---
Odor
Components are odorless.
Softening Point
---
Colour
white, clear
Molecular Weight
---
Solubility
Reagents are already aqueous; beads are soluble in aqueous solutions.
Voc Content
---
Lower Explosive Limit
No information identified.
Density
---
Solubility In Fat
---
Boiling Point
Liquid reagents near 100 C.
Vapor Pressure
Minimal.
Upper Explosive Limit
No information identified.
Explosive Limits
---
Melting Point
Liquid reagents near 0 C.
Dynamic Viscosity
No information identified.
Freezing Point
Liquid reagents near 0 C.
Crystallisation Point
---
Evaporation Rate
Minimal.
Flammability
No information identified.
Metal Corrosion
---
Flash Point
None.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1824
Shipping Name
Sodium hydroxide solution.
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Xpert vanA / Xpert vanA/vanB?

The signal word is warning.

What is the physical form of Xpert vanA / Xpert vanA/vanB?

Xpert vanA / Xpert vanA/vanB is a solid, liquid appearing as beads are solid white components in cartridges; reagents are clear liquids which are primarily buffered in aqueous solutions. with white, clear color. It has components are odorless. odor.

What is the solubility of Xpert vanA / Xpert vanA/vanB?

Reagents are already aqueous; beads are soluble in aqueous solutions.

What is Xpert vanA / Xpert vanA/vanB used for?

as used in the laboratory

What are the hazard statements for Xpert vanA / Xpert vanA/vanB?

This substance has 3 hazard statements:

  • H302: Harmful if swallowed.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.

What is the melting point of Xpert vanA / Xpert vanA/vanB?

The melting point is Liquid reagents near 0 C. and the boiling point is Liquid reagents near 100 C..