Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- xGen® 2x Bead Wash Buffer
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For research and development purposes only.
Uses advised against
No specific uses advised against are identified.
Manufacturers & Suppliers
Integrated DNA Technologies
manufacturer
1710 Commercial Park, Coralville Iowa, 52241
Emergency Contacts
ChemTrec
800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Notes
The exact percentage is withheld as a trade secret in accordance with 29 CFR 1910.1200.
First Aid Measures
Emergency procedures for chemical exposure incidents
No specific recommendations. If throat irritation or coughing persists, proceed as follows. Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Loosen tight clothing such as collar, tie or belt. Get medical attention if any discomfort continues.
Symptoms: No specific symptoms known. Spray/mists may cause respiratory tract irritation.
No specific recommendations. Rinse with water. Get medical attention if any discomfort continues.
Symptoms: No specific symptoms known. May cause discomfort.
Remove any contact lenses and open eyelids wide apart. Rinse with water. Get medical attention if any discomfort continues.
Symptoms: No specific symptoms known. May be slightly irritating to eyes.
No specific recommendations. If throat irritation or coughing persists, proceed as follows. Rinse mouth. Get medical attention if any discomfort continues.
Symptoms: No specific symptoms known. May cause discomfort if swallowed.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The product is not flammable. Extinguish with alcohol-resistant foam, carbon dioxide, dry powder or water fog. Use fire-extinguishing media suitable for the surrounding fire.
Do not use water jet as an extinguisher, as this will spread the fire.
Containers can burst violently or explode when heated, due to excessive pressure build-up.
Avoid breathing fire gases or vapors. Evacuate area. Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk. Cool containers exposed to flames with water until well after the fire is out. If a leak or spill has not ignited, use water spray to disperse vapors and protect men stopping the leak.
Firefighter Protection
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective clothing. Standard Firefighter's clothing including helmets, protective boots and gloves will provide a basic level of protection for chemical incidents.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No specific recommendations. For personal protection, see Section 8.
Avoid discharge into drains or watercourses or onto the ground.
Reuse or recycle products wherever possible. Absorb spillage to prevent material damage. Flush contaminated area with plenty of water. Wash thoroughly after dealing with a spillage.
Related Products
Similar products with comparable safety profiles
Wash Buffer 20x
---
Wash Buffer
---
Wash Buffer 3
---
Stringent Wash Buffer (20x)
---
Genonex 1 L Washing Liquid Concentrate
---
IQFISH Fast Hybridization Buffer 200ul, Part Number G9415A
---
Acid wash Solution 2x2 L
---
Sodium Dodecyl Sulphate Gen-Apex® for Molecular Biology
CAS: 151-21-3
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Read and follow manufacturer's recommendations. Wear protective clothing as described in Section 8 of this safety data sheet. Keep away from food, drink and animal feeding stuffs. Handle all packages and containers carefully to minimize spills. Keep container tightly sealed when not in use. Avoid the formation of mists.
Store away from incompatible materials (see Section 10). No specific recommendations.
Wash promptly if skin becomes contaminated. Take off contaminated clothing and wash before reuse. Wash contaminated clothing before reuse.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No specific ventilation requirements.
No specific hand protection recommended. Large Spillages: Wear protective gloves.
No specific eye protection required during normal use. Large Spillages: Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible.
No specific recommendations. Provide adequate ventilation. Large Spillages: If ventilation is inadequate, suitable respiratory protection must be worn.
Wear appropriate clothing to prevent any possibility of skin contact.
Not regarded as dangerous for the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal ambient temperatures and when used as recommended. Stable under the prescribed storage conditions.
See the other subsections of this section for further details.
No potentially hazardous reactions known.
There are no known conditions that are likely to result in a hazardous situation.
No specific material or group of materials is likely to react with the product to produce a hazardous situation.
Does not decompose when used and stored as recommended. Thermal decomposition or combustion products may include the following substances: Harmful gases or vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The generation of waste should be minimized or avoided wherever possible. Reuse or recycle products wherever possible. This material and its container must be disposed of in a safe way.
Dispose of surplus products and those that cannot be recycled via a licensed waste disposal contractor.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable.
- Shipping Name
- Not applicable.
- Transport Class
- No transport warning sign required.
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for xGen® 2x Bead Wash Buffer?
The signal word is no signal word.
What is the physical form of xGen® 2x Bead Wash Buffer?
xGen® 2x Bead Wash Buffer is a liquid. appearing as liquid. with colorless. color. It has odorless. odor.
What is the solubility of xGen® 2x Bead Wash Buffer?
Not available.
What is xGen® 2x Bead Wash Buffer used for?
For research and development purposes only.
What are the hazard statements for xGen® 2x Bead Wash Buffer?
This substance has 1 hazard statement:
- Not Classified
What is the melting point of xGen® 2x Bead Wash Buffer?
The melting point is Not available. and the boiling point is Not available..