ESAPOL 4G 7136.35

Remove victim to fresh air, away from the accident scene. In the event of respiratory symptoms (coughing, wheezing, breathing difficulty, asthma) keep the victim in a comfortable position for breathing. If necessary administer oxygen. If the subject stops breathing, administer artificial respiration. Get medical advice/attention.

Symptoms: coughing, wheezing, breathing difficulty, asthma

Take off immediately all contaminated clothing. Wash immediately and thoroughly with running water (and soap if possible). Get medical advice/attention. Avoid further contact with contaminated clothing.

Symptoms: skin irritation or rash

Remove, if present, contact lenses if the situation allows you to do so easily. Wash immediately with plenty of water for at least 15 minutes, opening the eyelids fully. Get medical advice/attention.

Do not induce vomiting unless explicitly authorised by a doctor. Do not give anything by mouth to an unconscious person. Get medical advice/attention.

carbon dioxide, foam, powder and water spray.

None in particular.

Organometallic derivative of tin. Coinvolto in un incendio può liberare monossido di carbonio (CO), Biossido di Carbonio (CO2), Ossidi di Stagno

Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health.

Block the leakage if there is no hazard.

The product must not penetrate into the sewer system or come into contact with surface water or ground water.

Collect the leaked product into a suitable container. Absorb the remainder with inert absorbent material.

Materials: inert absorbent material

Avoid leakage of the product into the environment. Do not eat, drink or smoke during use. Remove any contaminated clothes and personal protective equipment before entering places in which people eat.

Store only in the original container. Store the containers sealed, in a well ventilated place, away from direct sunlight.

Do not eat, drink or smoke during use. Remove any contaminated clothes and personal protective equipment before entering places in which people eat.

As the use of adequate technical equipment must always take priority over personal protective equipment, make sure that the workplace is well aired through effective local aspiration.

Protect hands with category III work gloves. The following should be considered when choosing work glove material (see standard EN 374): compatibility, degradation, permeability time. The work gloves' resistance to chemical agents should be checked before use, as it can be unpredictable. The gloves' wear time depends on the duration and type of use.

Wear airtight protective goggles (see standard EN ISO 16321).

Respiratory protection devices must be used if the technical measures adopted are not suitable for restricting the worker's exposure to the threshold values considered. Use a mask with a type AX filter whose class (1, 2 or 3) must be chosen according to the limit of use concentration. (see standard EN 14387). If the substance considered is odourless or its olfactory threshold is higher than the corresponding TLV-TWA and in the case of an emergency, wear open-circuit compressed air breathing apparatus (in compliance with standard EN 137) or external air-intake breathing apparatus (in compliance with standard EN 138). For a correct choice of respiratory protection device, see standard EN 529.

Wear category II professional long-sleeved overalls and safety footwear (see Regulation 2016/425 and standard EN ISO 20344).

The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards. Product residues must not be indiscriminately disposed of with waste water or by dumping in waterways.

Stable in the recommended storage conditions ..

No dangerous reaction if stored according to instructions.

No dangerous reactions are known under normal conditions of use.

Temperatures above 50 ° C.

Oxidizing agents, strongly alkaline or acid materials. Hydrolyzes in the presence of acids, bases.

Carbon monoxide, hydrochloric acid, phosphorus oxides, phosphoric acid, In case of fire it is possible the formation of organic pyrolysis products. When exposed to temperatures over 150°C it can generate toxic fumes of HCl, phosphorous oxide and chlorinated hydrocarbons.

Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations.

Reuse, when possible. Product residues should be considered special hazardous waste.