NextSDS Logo
Safety Data Sheet EN

REAPAK G-LE/6040

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
REAPAK G-LE/6040
Product Code
092249

Regulatory Identifiers

CAS Number
N/A

Identified Uses

PVC stabilizer

Manufacturers & Suppliers

R

Reagens S.p.A.

manufacturer

Via Codronchi, 4, 40016 S. Giorgio di Piano, Bologna - Italy

+39 051-6639111

Emergency Contacts

Centro Antiveleni Ospedale Niguarda Ca' Granda

+39 02 6610 1029

24 h

Regional Medicines and Poisons Information Centre NI

844 892 0111

24 h

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 Causes serious eye irritation.

Precautionary Statements

P264 Wash thoroughly after handling.
P280 Wear eye protection / face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/attention.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of substances listed below with nonhazardous additions.

Chemical Name CAS Number Concentration Hazardous
titanium dioxide EC: 236-675-5 13463-67-7 --- No
zinc dibenzoate EC: 209-047-3 553-72-0 --- Yes
3-acetyl-6-methyl-2H-pyran-2,4(3H)-dione EC: 208-293-9 520-45-6 --- Yes

For the wording of the listed hazard phrases refer to section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Eye contact

Rinse opened eye for several minutes under running water.

Ingestion

Call a doctor immediately.

Immediate Medical Attention

In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, extinguishing powder or water spray. Use fire extinguishing methods suitable to surrounding conditions.

Unsuitable media

Water with full jet

Specific hazards

In case of fire and/or explosion do not breathe fumes.

Firefighter Protection

Do not inhale explosion gases or combustion gases.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water. Keep contaminated washing water and dispose of appropriately. Do not allow to penetrate the ground/soil.

Cleanup methods

Pick up mechanically.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Dust explosion hazard. Avoid the accumulation of electrostatic charges. When using do not eat or drink. When using do not smoke. Avoid contact with skin and eyes.

Storage

Keep container tightly closed. Keep container dry. Keep away from food, drink and animal feedingstuffs.

Hygiene

When using do not eat or drink. When using do not smoke.

Fire prevention

No special measures required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation/exhaustion at the workplace.

Hands

Protective gloves for chemical risk are not indispensable. However it is recommended to use protective gloves against chemical risks according to EN 374 when handling. The glove should be chosen based on the specific conditions of use; the material, the thickness and the passage time must be selected along with the supplier. The determined penetration times according to EN 374 part III are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended.

Eyes

Safety glasses

Respiratory

dust filter

Environmental

Do not allow product to reach sewage system or any water course. Do not allow to penetrate the ground/soil.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Upper Explosive Limit
---
Form
Granules
Melting Point
Undetermined.
Colour Intensity
---
Solubility In Water
Insoluble.
Cloud Point
---
Properties Status
---
Kinematic Viscosity
Not applicable.
Crystallisation Point
---
Ph
Not applicable.
Odor Threshold
Not determined.
Relative Density
Not determined.
Evaporation Rate
Not applicable.
Voc Content
---
Appearance
---
Explosive Limits
---
Lower Explosive Limit
---
Dynamic Viscosity
Not applicable.
Physical State
Granules
Physical State Data
solid
Molecular Weight
---
Bulk Density
0.8 kg/m³
Flammability
Not determined.
Freezing Point
Undetermined.
Metal Corrosion
---
Density
Not determined.
Auto Ignition Temperature
---
Solubility
---
Flash Point
Not applicable.
State Under Standard Conditions
---
Relative Evaporation Rate
---
Solidification Point
---
Colour
Ivory
Odor
Characteristic
Decomposition Temperature
Not determined.
Solubility In Fat
---
Vapor Density
Not applicable.
Partition Coefficient
Not determined.
Softening Point
---
Boiling Point
Undetermined.
Vapor Pressure
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if used according to specifications.

Reactivity

No further relevant information available.

Hazardous reactions

No dangerous reactions known.

Avoid

No further relevant information available.

Incompatible

Acids, bases, Strong oxidizing agents

Decomposition

No dangerous decomposition products known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Must not be disposed together with household garbage. Do not allow product to reach sewage system.

Disposal

Must not be disposed together with household garbage.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Void
Shipping Name
Void
Transport Class
Void
Packing Group
Void
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for REAPAK G-LE/6040?

The signal word is warning.

What is the physical form of REAPAK G-LE/6040?

REAPAK G-LE/6040 is a granules with ivory color. It has characteristic odor.

What is REAPAK G-LE/6040 used for?

PVC stabilizer

What are the hazard statements for REAPAK G-LE/6040?

This substance has 1 hazard statement:

  • H319: Causes serious eye irritation.

What is the melting point of REAPAK G-LE/6040?

The melting point is Undetermined. and the boiling point is Undetermined..

Compliance Scanner

Scan your compliance