Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BENVIC ® ER 778CZ/6560
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Manufacture of plastics products, including compounding and conversion; For professional use only
Uses advised against
No additional information available
Manufacturers & Suppliers
BENVIC EUROPE IBE S.A.
manufacturer
CARRER BESOS 4-6, E-08170 MONTORNES DEL VALLES (BARCELONA) - Spain
+34 935444212
Emergency Contacts
Emergency Contact
+34 935444212
from 9 am to 5 pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| polyvinylchloride substance with national workplace exposure limit(s) (GB) | 9002-86-2 | 50 - 80% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Assure fresh air breathing. Allow the victim to rest.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. Take victim to a doctor if irritation persists.
Symptoms: May cause an allergic skin reaction.
Rinse opened eye for several minutes under running water. Then consult doctor.
Symptoms: Mechanical irritation.
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
Symptoms: No effects known.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
No unsuitable extinguishing media known.
The product is not easily ignited and does not promote flame spread.
Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. Use self-contained breathing apparatus and chemically protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Sweep up, shovel or vacuum. Can be slippery on hard, smooth walking area.
Avoid release to the environment.
Sweep or shovel spills.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Take precautionary measures against static discharge. Use personal protective equipment as required. Do not get in eyes, on skin, or on clothing.
Store in a dry, well ventilated place away from sources of heat, ignition and direct sunlight.
Do not eat, drink or smoke when using this product.
Take precautionary measures against static discharge. Store away from sources of heat and ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Apply technical measures to comply with the occupational exposure limits.
Wear protective gloves. PVC or other plastic material or natural rubber gloves
Where excessive dust may result, wear goggles
Dust production: dust mask with filter type P2. In the event of thermal decomposition : gas mask with filter type B
Wear suitable protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No additional information available
Not established.
Direct sunlight. Moisture. Avoid temperature above 60°C.
None known.
Carbon monoxide. Hydrochloric acid fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations.
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BENVIC ® ER 778CZ/6560?
The signal word is no signal word.
What is the physical form of BENVIC ® ER 778CZ/6560?
BENVIC ® ER 778CZ/6560 is a solid appearing as granulate. with no data available on colour. color. It has odourless. odor.
What is the solubility of BENVIC ® ER 778CZ/6560?
Water: Insoluble
What is BENVIC ® ER 778CZ/6560 used for?
Manufacture of plastics products, including compounding and conversion; For professional use only
What is the melting point of BENVIC ® ER 778CZ/6560?
The melting point is No data available and the boiling point is Not applicable.