Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BAEROPAN MC 93061 P
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Manufacture of plastics products, Polymer additive, Stabilizer
Manufacturers & Suppliers
Baerlocher GmbH
manufacturer
Freisinger Strasse 1, 85716 Unterschleissheim - Germany
+49-89/14373-0
Emergency Contacts
Emergency Contact
+44(0)1235 239670
0 - 24 h
Emergency Contact
+49-591/9132-0
0 - 24 h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Chemical nature : Mixture
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Wash off with soap and plenty of water.
Rinse with plenty of water.
Clean mouth with water and drink afterwards plenty of water. Get medical advice/ attention if you feel unwell.
Immediate Medical Attention
Get medical advice/ attention if you feel unwell.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Foam, Carbon dioxide (CO2), Dry chemical, Sand
High volume water jet
Smoke and fumes, toxic.
Cool closed containers exposed to fire with water spray.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Use mechanical handling equipment.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Take precautionary measures against static discharges. Keep away from sources of ignition - No smoking. Avoid formation and buildup of dust.
Store at room temperature in the original container. Keep in a dry place.
Take precautionary measures against static discharges. Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local exhaust
protective gloves acc. to EN 374, e.g. neoprene
Safety glasses
In the case of dust or aerosol formation use respirator with an approved filter. Half mask with a particle filter P2 (EN 143)
Long sleeved clothing, antistatic shoes
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored normally.
Stable at normal ambient temperature and pressure.
Risk of dust explosion.
Avoid dust formation. Keep away from heat and sources of ignition.
Strong oxidizing agents
No decomposition if used as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of as special waste in compliance with local and national regulations.
Dispose of as special waste in compliance with local and national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BAEROPAN MC 93061 P?
The signal word is no signal word.
What is the physical form of BAEROPAN MC 93061 P?
BAEROPAN MC 93061 P is a powder appearing as powder with off-white color. It has slight odor.
What is the solubility of BAEROPAN MC 93061 P?
Metal free components, partially soluble.
What is BAEROPAN MC 93061 P used for?
Manufacture of plastics products, Polymer additive, Stabilizer
What is the melting point of BAEROPAN MC 93061 P?
The melting point is > 100 °C .