Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BAEROPAN TX 92113 P/4
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Manufacture of plastics products, Polymer additive, Stabilizer
Manufacturers & Suppliers
Baerlocher GmbH
manufacturer
Freisinger Strasse 1, 85716 Unterschleissheim - Germany
Emergency Contacts
Emergency Contact
+44(0)1235 239670
0 - 24 h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| zinc dibenzoate EC: 209-047-3 | 553-72-0 | 10% | Yes |
Notes
For the full text of the H-Statements mentioned in this Section, see Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Wash off with soap and plenty of water.
Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart. Call a physician immediately.
Clean mouth with water and drink afterwards plenty of water. Call a physician immediately.
Immediate Medical Attention
Call a physician immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Foam, Carbon dioxide (CO2), Dry chemical, Sand
High volume water jet
Smoke and fumes, toxic.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Use mechanical handling equipment.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Take precautionary measures against static discharges. Keep away from sources of ignition - No smoking. Avoid formation and buildup of dust.
Store at room temperature in the original container. Keep in a dry place.
Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Local exhaust
protective gloves acc. to EN 374, e.g. neoprene
Safety glasses
In the case of dust or aerosol formation use respirator with an approved filter. Half mask with a particle filter P2 (EN 143)
Long sleeved clothing, antistatic shoes
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored normally.
Stable at normal ambient temperature and pressure.
Applies to granules (R), pastilles (TX) and flakes (SMS): The product is not a dust explosion risk as supplied; however the build-up of fine dust can lead to a risk of dust explosions. Applies to powder and remaining product forms: Dust can form an explosive mixture in air.
Avoid dust formation. Keep away from heat and sources of ignition.
Strong oxidizing agents
No decomposition if used as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of as special waste in compliance with local and national regulations.
Dispose of as special waste in compliance with local and national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BAEROPAN TX 92113 P/4?
The signal word is warning.
What is the physical form of BAEROPAN TX 92113 P/4?
BAEROPAN TX 92113 P/4 is a pastilles appearing as pastilles with off-white color. It has slight odor.
What is BAEROPAN TX 92113 P/4 used for?
Manufacture of plastics products, Polymer additive, Stabilizer
What are the hazard statements for BAEROPAN TX 92113 P/4?
This substance has 2 hazard statements:
- H319: Causes serious eye irritation.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of BAEROPAN TX 92113 P/4?
The melting point is > 100 °C .