Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TECHNOMELT AS 294
- Synonyms
- DORUS MS 294
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Hotmelt adhesive
Manufacturers & Suppliers
Henkel Ltd
national supplier
Wood Lane End, HP2 4RQ Hemel Hempstead, Great Britain
+44 1442 278000
Emergency Contacts
Emergency Contact
+44 0 8701 906777
24 Hours
Technical Services; Henkel Limited
+44 (0) 1606 593933
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hotmelt adhesive
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethylene-vinyl acetate copolymer | --- | --- | No |
| Hydrocarbon polymer | --- | --- | No |
Notes
Contains no dangerous substances exceeding the limits of the EU-Regulation
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air, consult doctor if complaint persists.
Molten product. After skin contact cool down immediately with cold water. Do not remove adherent product. Seek medical advice.
After contact with the hot melt: cool with water, seek medical attention.
Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.
Immediate Medical Attention
See section: Description of first aid measures
Medical Treatment
See section: Description of first aid measures
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All common extinguishing agents are suitable.
High pressure waterjet
In case of fire toxic gases can be released.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment.
Do not empty into drains / surface water / ground water.
Remove mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not eat, drink or smoke while working. Wash hands before work breaks and after finishing work.
Store in a cool, dry place. Keep away from heat and direct sunlight.
Do not eat, drink or smoke while working. Wash hands before work breaks and after finishing work.
Keep away from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation/extraction.
Wear refractive gloves while working with the hot melt.
Protective goggles. Protective eye equipment should conform to EN166.
In case of dust formation, we recommend wearing of appropriate respiratory protection equipment with particle filter P (EN 14387). This recommendation should be matched to local conditions.
Wear protective equipment. Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
None if used for intended purpose.
See section reactivity
None if used for intended purpose.
None if used properly.
At higher temperatures acetic acid may be released.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
In consultation with the responsible local authority, must be subjected to special treatment.
In consultation with the responsible local authority, must be subjected to special treatment.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is TECHNOMELT AS 294 known by?
TECHNOMELT AS 294 is also known as: DORUS MS 294
What is the hazard signal word for TECHNOMELT AS 294?
The signal word is no signal word.
What is the physical form of TECHNOMELT AS 294?
TECHNOMELT AS 294 is a solid material appearing as solid material granulated white with white color. It has specific odor.
What is the solubility of TECHNOMELT AS 294?
No data available / Not applicable
What is TECHNOMELT AS 294 used for?
Hotmelt adhesive
What is the melting point of TECHNOMELT AS 294?
The melting point is No data available / Not applicable and the boiling point is No data available / Not applicable.