Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GR 011
- Product Form
- Poly(vinyl) chloride, PVC
- Chemical Name
- Poly(vinyl) chloride
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Exempted
Identified Uses
Poly(vinyl) chloride is used as a raw material in the plastic processing industry. Industrial use: Plastics engineering (eg. extrusion, injection molding, calandering)
Uses advised against
At this moment we have not identified any uses advised against
Manufacturers & Suppliers
DUMAPLAST NV
manufacturer
Vliegplein 41, 9990 Maldegem
0032 (0) 50 72 90 11
Emergency Contacts
Belgian poison center
0032 (0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
According to Article 31 of the REACH Regulation the product does not fulfil the criteria of a hazardous substance, PBT, vPvB and does not contain any substances that would influence the final classification of the substance chemical characterization the preparation
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| PVC EC: 618-338-8 | 9002-86-2 | 50 - 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
not applicable
Symptoms: Dust may irritate airways and cause symptoms of bronchitis. Vapour from a hot product may irritate the mucosa of the nose and upper respiratory tract.
granulates: rinse the skin with water, - splashing with hot material: quickly cool with running water, remove contaminated clothing, immediately seek medical attention.
Wash immediately with water for at least 10 minutes
Rinse the mouth with water, give drinking water, seek medical attention.
Immediate Medical Attention
immediately seek medical attention (for skin contact with hot material), seek medical attention (for swallowing)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
large quantities of water, powder, carbon dioxide, foam or spray
None that are known
Firefighter Protection
Sensitive persons can make use of gloves, eye goggles or a breathing mask to protect the skin, the eyes or the respiratory tract.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
If the product is in a liquid form, stop it from entering de drainage system.
Limit leaking with earth and sand. If the product has escaped into a water course, into the drainage system, or has contaminated the ground or vegetation, notify the competent authorities.
Recover the product for re-use if possible, or for elimination. The product might, where appropriate, be absorbed by inert material. After the product has been recovered, rinse the area and materials involved with water
Materials: inert material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Do not eat, drink and smoke in work areas. Wash hands after use. Remove contaminated clothing and protective equipment before entering eating areas.
Store above 10°C at 20°C max in a dry place. Adequately ventilated premises.
Do not eat, drink and smoke in work areas. Wash hands after use. Remove contaminated clothing and protective equipment before entering eating areas.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
use appropriate gloves
Not needed for normal use.
Not needed for normal use.
No special precaution must be adapted for normal use.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
stable under normal conditions
Stable under normal conditions.
extreme low and high temperatures
None in particular.
None as long as it contains water.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
disposal of waste according to regulations by incineration in and special waste incinerator. Smaller quantities can be processed in a normal waste incinerator. Observe local regulation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is not classified as dangerous according to regulation 1272/2008.
The normal safety regulations when handling chemicals should be observed.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GR 011?
The signal word is no signal word.
What is the physical form of GR 011?
GR 011 is a granulates appearing as granulates with off white color. It has odourless odor.
What is GR 011 used for?
Poly(vinyl) chloride is used as a raw material in the plastic processing industry. Industrial use: Plastics engineering (eg. extrusion, injection molding, calandering)
What is the melting point of GR 011?
The melting point is not used .