Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ETINOX 610, ETINOX 630, ETINOX 630-P, ETINOX 631, ETINOX 631-P, ETINOX 650, ETINOX 605
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119458772-30-0057
Identified Uses
Plastics transformation industry.
Uses advised against
There are no uses advised against providing that the instructions described in this Safety Data Sheet are observed.
Manufacturers & Suppliers
ERCROS S.A.
manufacturer
Avda. Diagonal 595, 08014 Barcelona - Spain
+34 934 393 009
Vila-Seca factory
manufacturer
+34 977 39 06 11
Emergency Contacts
Vila-Seca factory
+34 977 39 06 11
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Commercial name: Etinox E-630 (Suspension) Chemical name: Homopolymer of vinyl polychloride.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Homopolymer of vinyl polychloride | 9002-86-2 | 99.8% | No |
| Suspension agents and additives | --- | 0.2% | No |
Full text of H-phrases: see section 16.
Notes
Full text of H-phrases: see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the patient to an area free of dust. Keeping them talking. Vapour from thermal degradation: oxygen therapy where needed. Seek medical help.
Symptoms: There is no evidence of respiratory effects due to high levels of exposure to PVC powder. Thermal decomposition products may irritate the respiratory system.
In the event that melted product adheres to the skin, do not attempt to remove. Cool the area with water.
Symptoms: Non-irritant. Thermal decomposition products may irritate the skin.
Wash the eyes with copious amounts of water for at least 15 minutes, lifting the lids. Do not rub.
Symptoms: Possible mechanical irritation in the eye (powder).
No special measures required.
Symptoms: No known effects.
Immediate Medical Attention
Depends on symptoms.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Any kind (water, all types of extinguisher, foam, oxygen starvation) It is a good idea to create water curtains to absorb gases and smoke and cool any equipment, recipients, containers, etc. that have been subjected to a fire. Wash all structures with water after a fire to prevent any potential corrosion.
Avoid spraying jets of water directly onto the product.
Closed containers could burst due to the formation of gases.
Any source of ignition or material that might burn should be moved away from the area.
Firefighter Protection
Cool containers and/or warehouses with water.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Collect the spilled product. Do not breathe in powder.
Collect the spilled product.
Collect the spilled product.
Related Products
Similar products with comparable safety profiles
ETINOX E 610
CAS: 9002-86-2
TEROSON EV 6059 7458460 G2X
---
TEROSON EV 6059 ET76-R026A98AC
---
TEROSON EV 6059 7337533 G2X
---
TEROSON EV 6106 84149-G3000 EX
---
ECORIC 60, ECORIC 60/MB, ECORIC 80, ECORIC 80/MB, ECORIC 810, ECORIC 810/MB
---
TEROSON EV 6107 63184-55T00
---
NUOSPERSEÒFX 605
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not smoke, eat or drink while handling the product. Label recipients properly. Before handling the product, ensure that the recipient to be used is clean. Use the recommended protective equipment.
Ambient temperature. Avoid the accumulation of static electricity. Ensure there are no sources of ignition close to the storage area (hot surfaces, naked flames, etc.). Protect storage areas with lightning conductors.
Do not smoke, eat or drink while handling the product.
Keep away from heat sources, hot spots or other sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Assessment of working conditions taking measurements of power on people and in the environment. General ventilation measures, localised extractors where there is a risk of dust being created.
Not necessary except in case of fire.
Integral goggles in powdery atmosphere (EN 166).
Filtering masks (EN 149). FFP1, FFP2, FFP 3 depending on the powder concentration. Mask to protect against powder if the atmosphere is very powdery (FILTERS EN143 P1, P2 or P3). In case of fire, use independent equipment (EN 137).
Not necessary except in case of fire.
Issue points: non-metallic particles containing chlorine and its compounds 150 mg/m³ (R.D. 100/2011). Measuring system: Isokinetic probe and gravimeter.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
See section 10.3
No data available.
Temperatures in excess of the decomposition temperature (170°C).
Strong oxidants. Only use recommended materials.
Smoke, carbon monoxide, carbon dioxide, hydrogen chloride, micro-particles of carbon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
No data available for acute or chronic toxicity to fish, crustaceans, algae, or other environmentally relevant organisms.
12.2. Persistence and degradability
The substance is reported as non-degradable.
12.3. Bioaccumulative potential
No data available for bioconcentration factor or partition coefficient.
12.4. Mobility in soil
12.5. Results of PBT (persistent, bioaccumulative and toxic) and vPvB (very persistent and very bioaccumulative) assessment
12.6. Other adverse effects
The product is biologically inert.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
recycled product
The product will be disposed of in accordance with the regulation currently in force.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Use individual protection measures as recommended in Section 8.2.2.
Use individual protection measures as recommended in Section 8.2.2.
Use individual protection measures as recommended in Section 8.2.2.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Product is not subject to the regulations on the classification, packaging and labeling of dangerous preparations (RD 225/2003 - Directive 1999/45/EC) and EU Regulation 1272/2008 amending Regulation 1907/2006 (REACH). In accordance with Art. 23 of Regulation (EC) 1272/2008 a label is not required for mixtures containing polymers if they do not present a hazard to human health by inhalation, ingestion or contact with skin or to the aquatic environment in the form in which they are placed on the market.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ETINOX 610, ETINOX 630, ETINOX 630-P, ETINOX 631, ETINOX 631-P, ETINOX 650, ETINOX 605?
The signal word is no signal word.
What is the physical form of ETINOX 610, ETINOX 630, ETINOX 630-P, ETINOX 631, ETINOX 631-P, ETINOX 650, ETINOX 605?
ETINOX 610, ETINOX 630, ETINOX 630-P, ETINOX 631, ETINOX 631-P, ETINOX 650, ETINOX 605 is a solid appearing as fine white powder with white color. It has odourless odor.
What is the solubility of ETINOX 610, ETINOX 630, ETINOX 630-P, ETINOX 631, ETINOX 631-P, ETINOX 650, ETINOX 605?
Not soluble
What is ETINOX 610, ETINOX 630, ETINOX 630-P, ETINOX 631, ETINOX 631-P, ETINOX 650, ETINOX 605 used for?
Plastics transformation industry.
What is the melting point of ETINOX 610, ETINOX 630, ETINOX 630-P, ETINOX 631, ETINOX 631-P, ETINOX 650, ETINOX 605?
The melting point is No data available. and the boiling point is Not applicable..