Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LIOJET UH021-YL-A5
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Inkjet Ink
Manufacturers & Suppliers
Toyo Ink Europe Specialty Chemicals
manufacturer
Boulevard Dambourney, 76350 Oissel, France
Emergency Contacts
Emergency Contact
+33 (0)1 45 42 59 59
24h/24
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Oxybis(methyl-2,1-ethanediyl) diacrylate EC: 260-754-3 | 57472-68-1 | 30 - 70% | Yes |
| 2-phenoxyethylacrylate EC: 256-360-6 | 48145-04-6 | 5 - 20% | Yes |
| Diphenyl(2,4,6-trimethylbenzoyl) phosphinoxid EC: 278-355-8 | 75980-60-8 | 5 - 15% | Yes |
| 1-Butanone, 2-(dimethylamino)-2-[(4-methylphenyl)methyl]-1-[4-(4-morpholinyl)phenyl]- EC: 438-540-0 | 119344-86-4 | 1 - 5% | Yes |
| 2,6-di-tert-butyl-p-cresol EC: 204-881-4 | 128-37-0 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air. Seek medical advice.
Wash skin thoroughly with mild soap and water. Remove contaminated clothing and shoes. Seek medical attention if irritation develops.
In case of eye contact, immediately rinse with clean water for 10-15 minutes. Seek medical attention if irritation develops.
If swallowed, seek medical advice immediately and show this container or label.
Immediate Medical Attention
Seek medical advice immediately and show this container or label; Seek medical attention if irritation develops.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2. Foam. Powder.
Heavy water stream.
Container may explode when heated. Irritant, corrosive and/or toxic gas may be generated by a fire.
Spray with water from distance to stay away from possible explosion. Fight fire from safe distance and protected location.
Firefighter Protection
In fire extinguishing activity, wear an appropriate air breathing apparatus and full protective clothing for chemicals to avoid inhalation of smoke and vapors.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak if safe to do so.
In case of small quantity, absorb the leakage with dry soil, sand and incombustible material or collect it into a container that can be covered tightly for later disposal by a plastic tool.
In case of large quantity, prevent the spills from spreading with embankment to lead them to a safe place for collection.
Avoid release to the environment.
Collect the material into a disposal container by sucking up or sweeping up.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide local exhaust or general room ventilation. Do not handle until all safety precautions have been read and understood. Avoid breathing dust/fume/gas/mist/vapours/spray. Wash hands thoroughly after handling. Avoid contact with skin. Keep away from ignition sources such as heat, sparks and open flame. – No smoking. Avoid swallowing. Wear recommended personal protective equipment. Avoid: All heat sources, including direct sunlight.
Store closed containers at temperature between 5 and 25°C. Protect from sunlight. Store in a closed container.
Wash hands thoroughly after handling.
Keep away from ignition sources such as heat, sparks and open flame. – No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Either local exhaust or general room ventilation is usually required.
Wear suitable gloves resistant to chemical penetration. Material Type: Rubber. Minimum breakthrough time: Refer to the manufacturer's gloves. Minimum thickness: Refer to the manufacturer's gloves
Chemical goggles or face shield with safety glasses.
Approved dust or mist respirator should be used if airborne particles are generated when handling this material.
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Reacts vigorously with strong oxidizers and acids.
Stable.
Will not occur.
Extremely high temperatures.
Strong oxidizing agents. Acidic.
No data available.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Toxicity
No data available.
Persistence and degradability
No data available.
Bioaccumulative potential
No data available.
Mobility in soil
No data available.
Results of PBT and vPvB assessment
No data available.
Other adverse effects
Material nearly insoluble in water.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not regulated.
- Transport Class
- Not regulated.
- Packing Group
- Not regulated.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Ensure all national/local regulations are observed.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LIOJET UH021-YL-A5?
The signal word is danger.
What is the physical form of LIOJET UH021-YL-A5?
LIOJET UH021-YL-A5 is a liquid. appearing as liquid. with yellow. color. It has light. odor.
What is the solubility of LIOJET UH021-YL-A5?
Insoluble.
What is LIOJET UH021-YL-A5 used for?
Inkjet Ink
What are the hazard statements for LIOJET UH021-YL-A5?
This substance has 5 hazard statements:
- H315: Causes skin irritation
- H317: May cause an allergic skin reaction
- H318: Causes serious eye damage
- H361f: Suspected of damaging fertility.
- H412: Harmful to aquatic life with long lasting effects
What is the melting point of LIOJET UH021-YL-A5?
The melting point is No data available. and the boiling point is No data available..