Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Swan WC Forte
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Bathroom fixture cleaner for professional use
Manufacturers & Suppliers
Greenspeed
manufacturer
P.O.Box 1250, 2280 CG Rijswijk (ZH), NL
+31703458737
http://www.greenspeed.eu/
Emergency Contacts
Emergency Contact
+31 70 345 87 37
public
+353 1 809 2166
Uitsluitend voor professionele hulpverleners
+31 30 274 88 88
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Citric Acid EC: 201-069-1 | 77-92-9 | 8% | Yes |
| Lauryl-glucoside EC: 600-975-8 | 110615-47-9 | 4% | Yes |
Notes
For the full text of the H phrases mentioned in this section, see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
in case of serious or continuous discomforts: remove to fresh air and seek medical attention.
Symptoms: sore throat, cough
rinse with water.
Symptoms: redness, pain
rinse first with plenty of water, if necessary seek medical attention.
Symptoms: caustic, redness, blurred vision, pain
rinse first with plenty of water, if necessary seek medical attention.
Symptoms: caustic, lack of breath, vomiting, blisters on lips and tongue, burning pain in mouth and throat, gullet and stomach
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, foam, powder, sprayed water
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not walk into or touch spilled substances and avoid inhalation of fumes, smoke, dusts and vapours by staying up wind. Remove any contaminated clothing and used contaminated protective equipment and dispose of it safely.
do not allow to flow into sewers or open water.
If possible remove by using absorbent material.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
handle with care to avoid spillage.
keep in a sealed container in a closed, frost-free, ventilated room.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
use with sufficient exhaust ventilation.
handling with nitril-gloves (EN 374). Breakthrough time: >480° Material thickness: 0,35 mm. Thoroughly check gloves before use. Take of the gloves properly without touching the outside with your bare hands. The manufacturer of the protective gloves has to be consulted about the suitability for a specific work station. Wash and dry your hands.
Tight-fitting safety goggles. Wear a face shield and protective suit in case of exceptional processing problems.
If necessary, use an air-purifying face mask in case of respiratory hazards. Use the ABEK type as protection against these troublesome levels.
impermeable clothing. The type of protective equipment depends on the concentration and amount of hazardous substances at the work station in question.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
extremely high or low temperatures.
stable under normal conditions.
protect from sunlight and do not expose to temperatures exceeding + 50°C.
acids, alkalines, oxidants, reductants
doesn't decompose with normal use
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The product may be discharged in the indicated percentages of utilization, provided it is neutralised to pH 7.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- not applicable
- Shipping Name
- not applicable
- Transport Class
- not applicable
- Packing Group
- not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Swan WC Forte?
The signal word is danger.
What is the physical form of Swan WC Forte?
Swan WC Forte is a liquid appearing as liquid . It has characteristic odor.
What is Swan WC Forte used for?
Bathroom fixture cleaner for professional use
What are the hazard statements for Swan WC Forte?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.