NextSDS Logo
Safety Data Sheet EN

RS Pro Ultrasonic Cleaning Liquid

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
RS Pro Ultrasonic Cleaning Liquid
Product Code
764-3017, ZP

Regulatory Identifiers

CAS Number
N/A
UFI Code
44R7-J06P-U004-KM5N

Identified Uses

Cleaning agent

Uses advised against

No specific uses advised against are identified

Manufacturers & Suppliers

R

RS Components Ltd

Birchington Road, Corby, Northants, NN17 9RS

+44 (0) 845 850 9900

R

RS Components Ltd

Glenview Industrial Estate, Herberton Road, Rialto, Dublin 12

+353 (0) 1 415 3100

Emergency Contacts

POISON INFORMATION CENTRE (Beaumont Hospital, Republic of Ireland only)

+353 (0)1 809 2166

08:00 - 22:00

Emergency Contact

+44 1235 239670

24hr

Emergency Contact

+44 (0) 1865 407333

24hr

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Asp. Tox. Cat. 1 H304

GHS Pictograms

GHS08 - Serious health hazard

GHS08

Hazard Statements

H304 May be fatal if swallowed and enters airways

Precautionary Statements

P102 Keep out of reach of children.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor.
P331 Do NOT induce vomiting.
P501 Dispose of contents/container in accordance with local, regional, national, and international regulations as applicable.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

This product does not contain candidate substances of very high concern at a concentration >=0.1% (Regulation (EC) No. 1907/2006 (REACH), Article 59)

Chemical Name CAS Number Concentration Hazardous
Hydrocarbons, C11-C13, isoalkanes, <2% aromatics EC: 920-901-0 --- 30 - 60% Yes
hydrocarbons, C11-C12, isoalkanes, <2% aromatics EC: 918-167-1 --- 30 - 60% Yes

Full text of H- and EUH-phrases: see section 16

Notes

Acute Toxicity Estimate No information available

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Aspiration into lungs can produce severe lung damage. If breathing has stopped, give artificial respiration. Get medical attention immediately. Remove to fresh air. Avoid direct contact with skin. Use barrier to give mouth-to-mouth resuscitation. If breathing is difficult, (trained personnel should) give oxygen. Get immediate medical attention. Delayed pulmonary edema may occur.

Symptoms: Difficulty in breathing. Coughing and/or wheezing. Dizziness.

Skin contact

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area.

Ingestion

ASPIRATION HAZARD IF SWALLOWED - CAN ENTER LUNGS AND CAUSE DAMAGE. Do NOT induce vomiting. If vomiting occurs spontaneously, keep head below hips to prevent aspiration. Rinse mouth. Never give anything by mouth to an unconscious person. Get immediate medical attention.

Immediate Medical Attention

Immediate medical attention is required.

Medical Treatment

Note to doctors: Because of the danger of aspiration, emesis or gastric lavage should not be used unless the risk is justified by the presence of additional toxic substances.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol resistant foam.

Unsuitable media

Do not scatter spilled material with high pressure water streams.

Specific hazards

Risk of ignition. Keep product and empty container away from heat and sources of ignition. In the event of fire, cool tanks with water spray.

Instructions

In the event of fire, cool tanks with water spray.

Firefighter Protection

Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate personnel to safe areas. Keep people away from and upwind of spill/leak. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Do not touch or walk through spilled material. Stop leak if you can do it without risk.

Environmental

Prevent further leakage or spillage if safe to do so. Prevent product from entering drains.

Cleanup methods

Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labelled containers.

Materials: inert absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use personal protection equipment. Avoid contact with skin and eyes. Avoid breathing vapours or mists. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Use with local exhaust ventilation. Use spark-proof tools and explosion-proof equipment. Keep in an area equipped with sprinklers. Use according to package label instructions.

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat, sparks, flame and other sources of ignition (i.e., pilot lights, electric motors and static electricity). Keep in properly labelled containers. Do not store near combustible materials. Keep in an area equipped with sprinklers. Store in accordance with the particular national regulations. Store in accordance with local regulations. Store locked up. Keep out of the reach of children. Store away from other materials.

Hygiene

Do not eat, drink or smoke when using this product. Contaminated work clothing should not be allowed out of the workplace. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and immediately after handling the product.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Use spark-proof tools and explosion-proof equipment. Keep in an area equipped with sprinklers.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation, especially in confined areas.

Hands

Wear suitable gloves. Impervious gloves.

Eyes

Tight sealing safety goggles.

Respiratory

No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.

Skin/Body

Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron. Antistatic boots.

Environmental

No information available.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Cloud Point
---
Flammability
No data available
State Under Standard Conditions
---
Freezing Point
---
Crystallisation Point
---
Density
No data available
Auto Ignition Temperature
No data available
Solubility In Fat
---
Boiling Point
No data available
Colour Intensity
---
Melting Point
No data available
Relative Density
No data available
Explosive Limits
---
Voc Content
---
Properties Status
---
Evaporation Rate
---
Metal Corrosion
---
Physical State Data
liquid
Dynamic Viscosity
1.48 mPa s @ 25°C
Ph
5 - 7
Kinematic Viscosity
No data available
Relative Evaporation Rate
---
Vapor Density
---
Partition Coefficient
No data available
Physical State
Liquid
Vapor Pressure
No data available
Bulk Density
No data available
Softening Point
---
Solidification Point
---
Solubility In Water
No data available
Odor
Characteristic.
Colour
Colourless
Lower Explosive Limit
No data available
Form
---
Molecular Weight
---
Upper Explosive Limit
No data available
Odor Threshold
No information available
Appearance
Liquid
Flash Point
> 60 °C
Solubility
No data available
Decomposition Temperature
None known
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No information available.

Hazardous reactions

None under normal processing.

Avoid

Heat, flames and sparks.

Incompatible

None known based on information supplied.

Decomposition

None known based on information supplied.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Should not be released into the environment. Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.

Disposal

Should not be released into the environment. Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not regulated
Shipping Name
Not regulated
Transport Class
Not regulated
Packing Group
Not regulated
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for RS Pro Ultrasonic Cleaning Liquid?

The signal word is danger.

What is the physical form of RS Pro Ultrasonic Cleaning Liquid?

RS Pro Ultrasonic Cleaning Liquid is a liquid appearing as liquid with colourless color. It has characteristic. odor.

What is the solubility of RS Pro Ultrasonic Cleaning Liquid?

No data available

What is RS Pro Ultrasonic Cleaning Liquid used for?

Cleaning agent

What are the hazard statements for RS Pro Ultrasonic Cleaning Liquid?

This substance has 1 hazard statement:

  • H304: May be fatal if swallowed and enters airways

What is the melting point of RS Pro Ultrasonic Cleaning Liquid?

The melting point is No data available and the boiling point is No data available.