Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LZ-98.02, Cover Varnish
- Product Code
- LZ-98.02.xxxx.x
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Masking material
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
ReiColor Chemie - GmbH
manufacturer
Werkstr. 21, D-90518 Altdorf b. N.
+49 9187 97030
http://www.reicolor.de
Emergency Contacts
ReiColor Chemie GmbH
+49 9187 970344
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphtha (petroleum), hydrodesulfurized heavy | 64742-82-1 | 15 - 25% | Yes |
| Solvent naphtha (petroleum), light arom. EC: 265-199-0 | 64742-95-6 | 2.5 - 10% | Yes |
| xylene EC: 215-535-7 | 1330-20-7 | 1 - 5% | Yes |
| butan-1-ol EC: 200-751-6 | 71-36-3 | 1 - 2.5% | Yes |
| Kohlenwasserstoffe, C11-C14, n-Alkane, iso-Alkane, cyclisch, aromatisch (2-25%) | 64742-81-0 | 0.1 - 2.5% | Yes |
| 2,6-Di-tert-butyl-p-kresol EC: 204-881-4 | 128-37-0 | 0.1 - 0.25% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air or oxygen; call for doctor. In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Do not induce vomiting; call for medical help immediately. A person vomiting while laying on their back should be turned onto their side.
Immediate Medical Attention
Call for doctor/medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Water with full jet
No further relevant information available.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation.
Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material. Do not flush with water or aqueous cleansing agents.
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Store in a cool location. Store only in the original receptacle. Store in cool, dry conditions in well sealed receptacles.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Solvent resistant gloves. Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves e.g.: Nitrile rubber, NBR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. In case of working at not adequately ventilated work places and spraying, breathing protection is obligatory. We recommend a fresh air helmet or a composite filter (only for short-term jobs): Filter A-P2 (EN 14387)
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system. Disposal must be made according to official regulations.
Disposal must be made according to official regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT
- Transport Class
- 3
- Packing Group
- III
Stowage Category A
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LZ-98.02, Cover Varnish?
The signal word is danger.
What is the physical form of LZ-98.02, Cover Varnish?
LZ-98.02, Cover Varnish is a fluid with according to product specification color. It has characteristic odor.
What is LZ-98.02, Cover Varnish used for?
Masking material
What are the hazard statements for LZ-98.02, Cover Varnish?
This substance has 4 hazard statements:
- H226: Flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H372: Causes damage to organs through prolonged or repeated exposure.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of LZ-98.02, Cover Varnish?
The melting point is Undetermined. and the boiling point is 142 °C.