Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RISO INK Ztype BLACK / U
- Product Code
- S-4254
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
INK for Digital Duplicator
Manufacturers & Suppliers
RISO KAGAKU CORPORATION
manufacturer
5-34-7 Shiba, Minato-ku, Tokyo, 108-8385, JAPAN
81 (3) 5441-6611
RISO,INC.
distributor
800 District Avenue, Suite 390 Burlington, MA, 01803 USA
(978) 777-7377
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If you feel unwell, move from the contamination immediately to fresh air and seek medical advice.
After contact with skin, wash immediately with plenty of water using a mild soap.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
If swallowed, do not induce vomiting and seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, CO₂, foam, dry chemical powder, dry sand
May produce toxic fumes of CO, CO₂, NOx, SOx
This ink does not act as a source of ignition, but might burn if exposed to a fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate the area until material is completely picked up.
Do not empty into the drains.
Shovel up, then wipe up with cloth or paper.
Materials: cloth or paper
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in the well-ventilated areas. Avoid contact with skin. Use only with cartridge.
Store at 5 - 35 °C and protect from sunlight. Keep the ink out of reach of children. Only original cartridge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation should be sufficient for most conditions.
Recommend the use of gloves in case of contact with skin.
Not normally required
Not normally required
Not normally required
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage and handling conditions.
No data available
No data available
Avoid exposure to high temperatures.
Strong oxidising agents
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Burn in an adequate incinerator or bury in landfill in accordance with all applicable regulations.
Any disposal practice must be in compliance with local, state and federal laws and regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not regulated
- Shipping Name
- Not applicable
- Transport Class
- Not regulated (DOT, IMDG, IATA)
- Packing Group
- Not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RISO INK Ztype BLACK / U?
The signal word is no signal word.
What is the physical form of RISO INK Ztype BLACK / U?
RISO INK Ztype BLACK / U is a paste . It has slight petroleum odor odor.
What is the solubility of RISO INK Ztype BLACK / U?
WATER SOLUBILITY: Negligible
What is RISO INK Ztype BLACK / U used for?
INK for Digital Duplicator
What is the melting point of RISO INK Ztype BLACK / U?
The melting point is < 0 °C and the boiling point is > 100 °C.