N,N-Dimethylformamide ROTISOLV® HPLC

Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.

Rinse skin with water/shower.

Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart. In case of eye irritation consult an ophthalmologist.

water spray, alcohol resistant foam, dry extinguishing powder, BC-powder, carbon dioxide (CO₂)

water jet

Combustible. In case of insufficient ventilation and/or in use, may form flammable/explosive vapour-air mixture. Solvent vapours are heavier than air and may spread along floors. Places which are not ventilated, e.g. unventilated below ground level areas such as trenches, conduits and shafts, are particularly prone to the presence of flammable substances or mixtures. Vapours are heavier than air, spread along floors and form explosive mixtures with air. Vapours may form explosive mixtures with air.

Fight fire with normal precautions from a reasonable distance.

Use personal protective equipment as required. Avoid contact with skin, eyes and clothes. Do not breathe vapour/spray. Avoidance of ignition sources.

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Absorb with liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents). Place in appropriate containers for disposal.

Materials: sand, diatomaceous earth, acid- or universal binding agents

Provision of sufficient ventilation. Avoid exposure.

Keep container tightly closed.

Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs. When using do not smoke.

Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge. Ground/bond container and receiving equipment.

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Type of material: Butyl caoutchouc (butyl rubber). Material thickness: ≥0,5 mm. Breakthrough times of the glove material: >480 minutes (permeation: level 6).

Use safety goggle with side protection.

Respiratory protection necessary at: Aerosol or mist formation. Type: A (against organic gases and vapours with a boiling point of > 65 °C, colour code: Brown).

Preventive skin protection (barrier creams/ointments) is recommended.

Keep away from drains, surface and ground water.

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

It's a reactive substance. Risk of ignition. If heated Risk of ignition. Vapours may form explosive mixtures with air.

Violent reaction with: strong oxidiser, Permanganates, for example potassium permanganate, Phosphorus oxides (e.g. P2O5)

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep away from heat. Decomposition takes place from temperatures above: >350 °C.

different plastics, copper, tin

Hazardous combustion products: see section 5. Release of: Formaldehyde. Ammonia (NH3).

This material and its container must be disposed of as hazardous waste. Dispose of contents/container in accordance with local/regional/national/international regulations.

Dispose of contents/container in accordance with local/regional/national/international regulations.

Provisions for dangerous goods (ADR) should be complied within the premises.