Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Castrol Hyspin AWH-M 100
- Product Code
- 456599
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Hydraulic fluid For specific application advice see appropriate Technical Data Sheet or consult your Castrol representative.
Manufacturers & Suppliers
Castrol (UK) Ltd.
Witan Gate House, 500-600 Witan Gate, Central Milton Keynes, MK9 1ES, United Kingdom
Emergency Contacts
Emergency Contact
+44 (0) 1908 853000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Highly refined mineral oil (IP 346 DMSO extract < 3%). Proprietary performance additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Highly refined mineral oil | --- | --- | No |
| Proprietary performance additives | --- | --- | No |
Notes
This product does not contain any hazardous ingredients at or above regulated thresholds.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. Get medical attention if symptoms appear.
In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Clean shoes thoroughly before reuse. Get medical attention if irritation develops.
In case of contact, immediately flush eyes with a copious amount of water for at least 15 minutes. Get medical attention if irritation occurs.
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately.
Immediate Medical Attention
If large quantities of this material are swallowed, call a physician immediately. Injections through the skin resulting from contact with the product at high pressure constitute a major medical emergency.
Medical Treatment
Treatment should in general be symptomatic and directed to relieving any effects. Surgical exploration should be undertaken without delay. Thorough and extensive debridement of the wound and underlying tissue is necessary to minimise tissue loss and prevent or limit permanent damage.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
In case of fire, use water fog, foam, dry chemical or CO2 extinguisher or spray.
Do not use water jet.
None identified.
None identified.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Immediately contact emergency personnel. Keep unnecessary personnel away. Use suitable protective equipment (Section 8). Follow all fire fighting procedures (Section 5). If emergency personnel are unavailable, contain spilled material.
For small spills add absorbent (soil may be used in the absence of other suitable materials) scoop up material and place in a sealed, liquid-proof container for disposal.
For large spills dike spilled material or otherwise contain material to ensure runoff does not reach a waterway. Place spilled material in an appropriate container for disposal.
Minimize contact of spilled material with soils to prevent runoff to surface waterways.
scoop up material and place in a sealed, liquid-proof container for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash thoroughly after handling.
Keep container tightly closed. Keep container in a cool, well-ventilated area.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapours below their respective occupational exposure limits.
Wear gloves that cannot be penetrated by chemicals or oil.
Safety glasses with side shields.
Use with adequate ventilation.
Avoid contact with skin. Wear clothing and footwear that cannot be penetrated by chemicals or oil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Will not occur.
Reactive with oxidizing agents.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Where possible, arrange for product to be recycled. Dispose of via an authorised person/ licensed waste disposal contractor in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This product is not classified according to the EU regulations.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Castrol Hyspin AWH-M 100?
The signal word is no signal word.
What is the physical form of Castrol Hyspin AWH-M 100?
Castrol Hyspin AWH-M 100 is a liquid. with amber. color. It has mild odor.
What is the solubility of Castrol Hyspin AWH-M 100?
insoluble in water.
What is Castrol Hyspin AWH-M 100 used for?
Hydraulic fluid For specific application advice see appropriate Technical Data Sheet or consult your Castrol representative.