Chip Quik Lead Free Solder Wire and Spheres Series: SMDSWLF, SMDSWLTFLP, SMD_NL, SMD20

Remove to fresh air. Support respiration if required. If not breathing, seek immediate medical attention.

Symptoms: Nose and throat irritation, headache, dizziness, difficulty breathing, coughing.

Wash affected area with plenty of warm, soapy water. If irritation persists, seek medical attention.

Symptoms: redness, burning, rash, dryness.

Flush with plenty of water, contact a physician. If contact lenses can be removed easily, flush eyes without contact lenses.

Symptoms: redness, burning, tearing, blurred vision.

Call a physician or Poison Control Center immediately. Do not induce vomiting. Drink large amounts of water. Never give anything by mouth to an unconscious person

Symptoms: nausea, vomiting, cramps.

Dry chemical, foam

Do not use water.

May release Toxic metal and oxide fumes. High concentrations of dust may present explosion hazard. Water trapped below molten metal may explode thus spattering molten metal.

Use NIOSH-approved self-contained Breathing Apparatus and full protective clothing if involved in a fire.

If material spills or leaks use a spatula to collect and place it in a plastic or glass jar. Remove traces of residue using cloth rags or paper towels moistened with Isopropyl Alcohol.

Avoid release to the environment. Collect spillage.

use a spatula to collect and place it in a plastic or glass jar. Remove traces of residue using cloth rags or paper towels moistened with Isopropyl Alcohol.

Materials: spatula, plastic or glass jar, cloth rags or paper towels, Isopropyl Alcohol

Keep containers tightly closed when not in use. Use care to avoid spills. Avoid inhalation of fumes or dust. Avoid contact with eyes, skin, and clothing. Wear appropriate personal protective equipment when working with or handling.

Store in a closed corrosive resistant container, with corrosive resistant liner, in cool dry place.

Always wash hands thoroughly after handling this product. Cosmetics/Food/Drink/Tobacco should not be consumed or used in work areas. Always wash hands after handling material and before applying or using cosmetics/food/drink/tobacco.

Extraction is necessary to remove fumes evolved during reflow. Use only with production equipment designed for use with solder wire. Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below TLVs.

Protective gloves should be worn when the possibility of skin contact exists (EU: EN 374-1:2003).

Use with appropriate eye protection: Goggles or face shield (EU: EN 166-S 3 9).

A (US: NIOSH; EU: EN 140:1998, EN 14387:2004 A)-approved air-purifying respirator with fume/organic chemical cartridge should be worn when airborne concentrations may be exceeded. General and local exhaust ventilation is the preferred means of protection.

Work clothes should be worn and laundered in accordance with current Lead (Pb) standards (US: OSHA).

Stable

NE

NE

NE

Oxidizing materials, acids, hydrogen peroxide, bases

Harmful organic fumes and toxic oxide fumes may form at elevated temperatures.

Scrap and waste should be recycled or stored in a dry, sealed container for later disposal.

Disposal must be in accordance with Federal, State/Provincial, and Local Regulations.