NextSDS Logo
Safety Data Sheet EN

2-Propanol

CAS 67-63-0

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
2-Propanol
Product Code
A461-1, A461-4, A461-212, A461-500
Synonyms
Isopropanol; Isopropyl alcohol; IPA

Regulatory Identifiers

CAS Number
67-63-0 Check regulations →

Identified Uses

Laboratory chemicals.

Uses advised against

Food, drug, pesticide or biocidal product use.

Manufacturers & Suppliers

F

Fisher Scientific Company

manufacturer

One Reagent Lane, Fair Lawn, NJ 07410

(201) 796-7100

Emergency Contacts

CHEMTREC®

800-424-9300

CHEMTREC®

001-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2
Eye Irrit. Cat. 2
STOT SE Cat. 3
STOT RE Cat. 2

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 Highly flammable liquid and vapor
H319 Causes serious eye irritation
H335 May cause respiratory irritation
H336 May cause drowsiness or dizziness
H373 May cause damage to organs through prolonged or repeated exposure

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking
P233 Keep container tightly closed
P235 Keep cool
P240 Ground/bond container and receiving equipment
P241 Use explosion-proof electrical/ventilating/lighting equipment
P242 Use only non-sparking tools
P243 Take precautionary measures against static discharge
P260 Do not breathe dust/fume/gas/mist/vapors/spray
P264 Wash face, hands and any exposed skin thoroughly after handling
P271 Use only outdoors or in a well-ventilated area
P280 Wear protective gloves/protective clothing/eye protection/face protection
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower
P304 + P341 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P312 Call a POISON CENTER or doctor/physician if you feel unwell
P314 Get medical attention/advice if you feel unwell
P337 + P313 If eye irritation persists: Get medical advice/attention
P370 In case of fire: Use CO2, dry chemical, or foam for extinction
P403 + P233 Store in a well-ventilated place. Keep container tightly closed
P405 Store locked up
P501 Dispose of contents/container to an approved waste disposal plant

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Isopropyl alcohol 67-63-0 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Get medical attention. If not breathing, give artificial respiration.

Symptoms: Difficulty in breathing. Inhalation of high vapor concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting.

Skin contact

Wash off immediately with plenty of water for at least 15 minutes. Get medical attention if symptoms occur.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

Do NOT induce vomiting. Get medical attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO₂, dry chemical, dry sand, alcohol-resistant foam. Water mist may be used to cool closed containers.

Unsuitable media

Water may be ineffective

Specific hazards

Flammable. Risk of ignition. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Containers may explode when heated.

Firefighter Protection

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Thermal decomposition can lead to release of irritating gases and vapors.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment as required. Avoid contact with skin, eyes or clothing.

Environmental

Should not be released into the environment. See Section 12 for additional Ecological Information.

Cleanup methods

Soak up with inert absorbent material. Use spark-proof tools and explosion-proof equipment.

Materials: inert absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear personal protective equipment/face protection. Keep away from open flames, hot surfaces and sources of ignition. Use spark-proof tools and explosion-proof equipment. Use only non-sparking tools. Take precautionary measures against static discharges. Do not get in eyes, on skin, or on clothing. Do not breathe mist/vapors/spray. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded.

Storage

Keep away from heat, sparks and flame. Flammables area. Keep container tightly closed in a dry and well-ventilated place.

Fire prevention

Keep away from open flames, hot surfaces and sources of ignition. Use spark-proof tools and explosion-proof equipment. Take precautionary measures against static discharges. All metal parts of the equipment must be grounded.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure that eyewash stations and safety showers are close to the workstation location. Use explosion-proof electrical/ventilating/lighting equipment. Ensure adequate ventilation, especially in confined areas.

Hands

Wear appropriate protective gloves

Eyes

Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.

Respiratory

When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.

Skin/Body

Wear appropriate protective clothing to prevent skin exposure.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Colorless
Colour
Colorless
Colour Intensity
---
Form
---
Odor
Alcohol-like
Odor Threshold
No information available
Ph
7 1% aq. sol
Melting Point
-89.5 °C / -129.1 °F
Boiling Point
81 - 83 °C / 177.8 - 181.4 °F
Flash Point
12 °C / 53.6 °F
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
1.7
Vapor Pressure
43 mmHg @ 20 °C
Vapor Density
2.1 @ 20 °C / 68 °F
Relative Density
0.785
Bulk Density
---
Density
---
Flammability
Not applicable
Upper Explosive Limit
12 vol %
Lower Explosive Limit
2 vol %
Explosive Limits
---
Auto Ignition Temperature
425 °C / 797 °F
Decomposition Temperature
No information available
Solubility
Miscible with water
Partition Coefficient
No data available
Solubility In Water
Miscible with water
Solubility In Fat
---
Molecular Weight
60.1
Voc Content
100% (Organic Carbon (by mass) = 59.9 %) (EC/1999/13)
Metal Corrosion
---
Dynamic Viscosity
2.27 mPa.s at 20 °C
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

None known, based on information available

Hazardous reactions

None under normal processing. Hazardous polymerization does not occur.

Avoid

Heat, flames and sparks. Keep away from open flames, hot surfaces and sources of ignition.

Incompatible

Strong oxidizing agents, Acids, Halogens, Acid anhydrides

Decomposition

Carbon monoxide (CO), Carbon dioxide (CO₂), peroxides

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1219
Shipping Name
Isopropanol
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is 2-Propanol known by?

2-Propanol is also known as: Isopropanol; Isopropyl alcohol; IPA

What is the hazard signal word for 2-Propanol?

The signal word is danger.

What is the physical form of 2-Propanol?

2-Propanol is a liquid appearing as colorless with colorless color. It has alcohol-like odor.

What is the solubility of 2-Propanol?

Miscible with water

What is 2-Propanol used for?

Laboratory chemicals.

What are the hazard statements for 2-Propanol?

This substance has 5 hazard statements:

  • H225: Highly flammable liquid and vapor
  • H319: Causes serious eye irritation
  • H335: May cause respiratory irritation
  • H336: May cause drowsiness or dizziness
  • H373: May cause damage to organs through prolonged or repeated exposure

What is the melting point of 2-Propanol?

The melting point is -89.5 °C / -129.1 °F and the boiling point is 81 - 83 °C / 177.8 - 181.4 °F.